Rolma Spray Paint 2K Transparent Glossy Two-component Spray CR15 CR 15 400ml

ROLMA CAR REFINISHING CR16 CLEAR 2K FOR CARS AND MOTORCYCLES, PROFESSIONAL FINISH
To be used as a finish on matte bases.
Features:
High protection from U.V. rays, light stable and non-yellowing;
Weather resistant;
Excellent flow and finish grade;
Extremely resistant to chemical agents and mechanical stress;
Scratch and fuel resistant.
The catalyst (isocyanate) is contained in a casing that is in turn contained in the can itself and must be activated at the time of use.

Format of 400ml

Preparation of the supports
Cleaning with anti-silicone solvent.

Product preparation
Shake the can vigorously.
Remove the red cap from the nozzle, turn the can upside down and place the red cap on the stem at the base of the can.
Position the can upside down on a hard surface and press the red cap with the palm of your hand until it locks. Remove the red cap.
Shake the can vigorously to mix the components.

Application
Environmental conditions: Temperature 15-25 °C, r.h. < 80%
Distance from the support: 20-30 cm.
Number of coats: 2-3
Interval between coats: 5 minutes
Recommended thickness: 40-50

Drying (at 20°C, r.h. <65%)
Dust-free 5 - 15 minutes
Touch dry 4 hours
Full curing 24 hours
Pot-Life 5-6 hours

Instructions for use
Shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.