Macota Hose Spray Paint Spray High Temperatures Brake Calipers Mufflers 800 °

Macota High Temperature Spray Enamel Tube.

Heat resistant silicone based enamel for decoration and protection of internal and external surfaces.

Ideal for both automotive (mufflers, exhaust pipes, engines, etc.) and home use (boilers, stoves, fire screens, etc.)

Paint resistant up to peaks of 800, fast drying, good coverage, resistant to sunlight and atmospheric agents, non-yellowing, free from pigments consisting of heavy metals and gases considered harmful to ozone..

The paint is applied to cold surfaces.

Use the can at 20-25, shake the can for a few minutes, spray about 20-25 cm away from the surface to be treated, keeping it vertical..

To obtain a homogeneous application of the product, it is advisable to shake the can from time to time during use.

Apply with light and crossed passes first vertically and then horizontally.

Appearance finish: OPAQUE

Theoretical yield: with 4 crossed passages + - 1-1.2 square meters.

Touch dry: 15-20 minutes

Deep dry: 24-36 hours depending on the thickness

Suitable for indoors and outdoors

Available colours: Black, Silver, Transparent, White, Red, Yellow, Blue, Green and Anthracite, the colors listed above are in 400ml packs, while for the Black, Red and Silver colors they are also available in 200ml.

Support preparation: The surface to be treated must be dry and clean and the parts not to be treated must be previously masked, the number of recommended passes always depends on the normal absorption of the surfaces.

On surfaces with higher absorption, more passes are required.

 

How to dispose of:

Spray can : FE40 - Steel or Iron Disposal

Cap and spray nozzle : PP5 - Plastic Disposal

 

H222 Extremely flammable aerosol.

H229 Pressurized container: May burst if heated

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

EUH066 Repeated exposure may cause skin dryness or cracking.

P101 In the event of a doctor's consultation, keep the product container or label available.

P102 Keep out of reach of children.

P210 Keep away from heat sources, hot surfaces, sparks, open flames or other sources of ignition. Not smoking.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P260 Do not breathe dust / fume / gas / mist / vapors / spray.

P271 Use only outdoors or in a well-ventilated area.

P304 + P340 IN CASE OF INHALATION: transport the injured person to fresh air and keep him at rest in a position that favors breathing.

P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing..

P312 Call a POISON CENTER / doctor /./ if you feel unwell.e.

P337 + P313 If eye irritation persists, consult a doctor..

P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 o C / 122 o F..

P501 – Dispose of the product / container in…

 

Contains ACETONE, ETHYL ACETATE, N-BUTYL ACETATE.

UFI: V500-X0WJ-300C-YGJE

 

Instructions for use:

-The paint is applied to cold surfaces.
-Use the spray can at 20-25°, shake the can for a few minutes, spray at about 20-25 cm from the surface to be treated while keeping it in a vertical position.
-To achieve an even application of the product, it is recommended to shake the can occasionally during use.
-Apply with light and crossed passes, first vertically and then horizontally.
-Finish appearance: MATTE
-Theoretical yield: with 4 crossed passes +- 1-1.2 square meters.
-Touch dry: 15-20 minutes
-Through dry: 24-36 hours depending on the thickness

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.