

Smalto acrilico bicomponent acrylic paint 2k glossy matte ral 1kg
Color, choose the shade
Finish
Smalto acrilico bicomponent acrylic paint 2k glossy matte ral 1kg
Red-orange-yellow / Glossy
Punto Vendita Monselice Net Coatings
Via Emilia 2
35043 Monselice PD
Italy
RAL 1035, RAL 1036, RAL 2013, RAL 3032, RAL 3033, RAL 4011, RAL 4012, RAL 5025, RAL 5026, RAL 6035, RAL 6036, RAL 7048, RAL 8029, RAL 9022, RAL 9023, RAL 1026, RAL 2005, RAL 2007, RAL 3024, RAL 3026, RAL 6038
Megasid ACRILRSID two-component enamel based on acrylic-polyurethane resins Suitable for painting high-quality items in general, it offers good adhesion to iron, aluminium and its alloys, galvanised sheet metal and fibreglass, following pretreatment or sanding.
Excellent weather resistance, good resistance to chemicals and fuels, and moderate resistance to solvents.
Available in the following finishes: Gloss, Semi-Gloss, Semi-Matt and Matt.
Price per KG, each kit contains hardener, thinner sold separately CLICK HERE FOR THINNER
Technical data:
Solids Content (w/w): 58,9 ± 1 %
Viscosity (DIN4/25°C): 75 - 100 sec
Pot Life: 6-8 hours at 25°C
Application:
It can be applied directly to aluminium and its alloys if the surface has been pretreated or sanded. For better adhesion to aluminium and galvanised sheet metal and improved corrosion protection on iron and its alloys, we recommend first applying a primer from the Megasid epoxy primer range.
Do you need to paint iron? Find out how to prepare the surface, treat rust and apply primer in our step-by-step guide to painting iron.
ACRILRSID can be applied not only with traditional spray guns but also with mixed air or airless systems, brush, and roller.
Lower temperatures delay drying, while much higher temperatures can cause surface defects.
The enamels in question must be applied fluidly and in a thin layer, as the high solid content ensures full and glossy films with only two coats.
Insufficient thinning can cause film imperfections (small blisters or craters).
It is advisable that the air drying of ACRILRSID enamels occurs at an air temperature of about 20°C and with not too high humidity.
These enamels are always recoatable, but after more than 12 hours of air drying or accelerated drying in an oven, a light sanding is recommended before recoating.
Theoretical Coverage:
At 30 Microns: 10 sqm ± by spray; for brush and roller, approximately 30% is lost
Thinning:
Up to a maximum of 5% by weight with NC 170 polyurethane thinner
Catalysis:
For Glossy: 50% by weight with catalyst for 34610LM
For Semi-gloss, Semi-matte: 35% by weight with catalyst for 34610LM
For Matte: 30% by weight with catalyst for 34610LM
Incorrect catalysis can irreversibly compromise the color appearance and drying time.
Once catalyzed, do not close the can under any circumstances as the reaction could cause the lid to explode.
Drying:
Dust-free: 20-30 minutes
Touch dry: 3-5 hours
Through dry: 24 hours
Maximum film resistance is achieved after 7-8 days.











