SIKA
Sika Primer 290 DC Primer Adhesion promoter for wooden and fiberglass slats 250ml
Non-pigmented solvent-based primer for gluing and sealing wooden planks
Quantity:
Pickup available at Punto Vendita Net Coatings
Usually ready in 1 hour
Sika Primer 290 DC Primer Adhesion promoter for wooden and fiberglass slats 250ml
Punto Vendita Net Coatings
Pickup available, usually ready in 1 hour
Via Emilia 2
35043 Monselice PD
Italy
Sika® Primer-290 DC is used to improve adhesion on teak, mahogany, Oregon pine, and polyester-based GRP. Consult the manufacturer and conduct tests on the original substrates before using Sika® Primer-290 DC on materials subject to stress cracking. This product is suitable only for experienced professional users. To ensure adhesion and compatibility of materials, it is necessary to conduct tests with the substrates under real conditions.
Application method:
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants.
Adhesion to substrates can be improved by adding and/or combining pre-treatment processes such as abrasion and cleaning.
Application:
Apply a thin but covering layer of Sika® Primer-290 DC with a clean, dry brush.
Ensure that the teak is completely covered by the primer but avoid excess material.
Surfaces treated with primer must be allowed to dry for at least 60 minutes before sealing or bonding with Sikaflex® products.
For spray application, contact Sika Industry's Technical Department.
The ideal application temperature for surfaces is between 15°C and 25°C.
Sika® Primer-290 DC should be applied only once. Care must be taken to ensure that this single application provides a sufficiently dense coverage. Consumption and application method depend on the specific nature of the substrates. Seal the container tightly immediately after each use.
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants.
Adhesion to substrates can be improved by adding and/or combining pre-treatment processes such as abrasion and cleaning.
Application:
Apply a thin but covering layer of Sika® Primer-290 DC with a clean, dry brush.
Ensure that the teak is completely covered by the primer but avoid excess material.
Surfaces treated with primer must be allowed to dry for at least 60 minutes before sealing or bonding with Sikaflex® products.
For spray application, contact Sika Industry's Technical Department.
The ideal application temperature for surfaces is between 15°C and 25°C.
Sika® Primer-290 DC should be applied only once. Care must be taken to ensure that this single application provides a sufficiently dense coverage. Consumption and application method depend on the specific nature of the substrates. Seal the container tightly immediately after each use.
Disposal:
Jar: FE40 - Iron collection
Cap: HDPE2 - Plastic collection.
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Jar: FE40 - Iron collection
Cap: HDPE2 - Plastic collection.
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
