DESCRIPTION

Sika Primer-206 G + P is a black solvent based primer, which reacts with moisture and forms a thin layer..

This layer acts as a link between substrates and adhesives. Sika Primer-206 G + P is specifically formulated for the treatment of surfaces to be bonded prior to the application of one-component Sika polyurethanes..

FIELDS OF APPLICATION

Sika Primer-206 G + P is used to improve adhesion on substrates such as float glass, ceramic screen prints, pre-coatings, painted surfaces and some plastics and metals..

Seek manufacturer's advice and perform tests on original substrates before using Sika Primer-206 G + P on materials prone to stress cracking..

This product is only suitable for experienced professional users.

METHOD OF APPLICATION

Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion to substrates can be improved by adding and / or combining pre-treatment processes such as abrasion and cleaning. Pre-treat the area to be bonded of the substrates with Sika Aktivator-100 using the wipe-on, wipe-off method and wait for evaporation..

Application

Shake Sika Primer206 G + P very carefully until the mixing ball moves freely..

Continue shaking for another minute and apply a thin but covering layer using a brush, felt pad or sponge.

The ideal application and surface temperature is between 15 C and 25 C. Sika Primer-206 G + P only needs to be applied once.ta.

Care must be taken to ensure that this single application gives sufficiently dense coverage.

Consumption and method of application depend on the specific nature of the substrates. Hermetically reseal the container immediately after each use.

 

 

Disposal:

Jar: FE40 - Iron Collection

Cap: HDPE2 - Plastic collection.

Recycle only if perfectly clean and empty.

Otherwise, recycle at special ecological centers. .

 

Hazard label:

 

H225 Highly flammable liquid and vapor.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

EUH066 Repeated exposure may cause skin dryness or cracking.

P210 Keep away from heat sources, hot surfaces, sparks, open flames or other sources of ignition. Not smoking.

P233 Keep container tightly closed.

P261 Avoid breathing mist or vapors.

P280 Wear protective gloves / clothing / eye protection / face protection

P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin.

P370 + P378 In case of fire: use dry sand, dry chemical or alcohol-resistant foam to extinguish.

ethyl acetate

Hexamethylene diisocyanate, oligomers

Isophorondiisocyanate homopolymer

hexamethylene diisocyanate

EUH204

Contains isocyanates. It can cause an allergic reaction.

«Starting from 24 August 2023, industrial or professional use is allowed only after having received adequate training..