Rolma
Rolma Spray Paint Can 2K Transparent Matt CR16 CR 16 400ml
Matte spray paint to be used as a finish on matte bases. Shipping in 24/48 hours.
Quantity:
Pickup available at Punto Vendita Net Coatings
Usually ready in 1 hour
Rolma Spray Paint Can 2K Transparent Matt CR16 CR 16 400ml
Punto Vendita Net Coatings
Pickup available, usually ready in 1 hour
Via Emilia 2
35043 Monselice PD
Italy
ROLMA CAR REFINISHING CR16 TRANSPARENT 2K FOR CARS AND MOTORCYCLES, PROFESSIONAL FINISH
To be used as a finish on matte bases.
Features:
- High protection from U.V. rays, light stable and non-yellowing;
- Weather resistant;
- Excellent relaxation and level of finish;
- Very high resistance to chemical agents and mechanical stress;
- Scratch and fuel resistant.
The catalyst (isocyanate) is contained in a casing that is in turn contained within the cylinder itself and must be activated at the time of use.
Preparation of supports
Cleaning with anti-silicone solvent.
Product preparation
Shake the cylinder vigorously.
Remove the red cap from the nozzle, turn the canister upside down and place the red cap on the stem at the base of the canister.
Position the cylinder upside down on a hard surface and press the red cap with the palm of your hand until it locks. Remove the red cap.
Shake the canister vigorously to mix the components.
Application
Environmental conditions: Temperature 15-25 °C, r.h. < 80%
Distance from the support: 20-30 cm.
Number of passes: 2-3
Interval between hands: 5 minutes
Recommended thickness: 40-50
Drying (at 20°C, r.h. <65%)
Dust-free 5 - 15 minutes
Touch dry in 4 hours
Complete hardening 24 hours
Pot-Life 5-6 or
Instructions for use
Shake the canister for about 1 minute. Apply several light and crossed hands while holding the canister in a vertical position at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the canister upside down and spray for a few seconds.
Preparation of the supports
Cleaning with anti-silicone solvent.
Product preparation
Shake the can vigorously.
Remove the red cap from the nozzle, turn the can upside down and place the red cap on the stem at the base of the can.
Position the can upside down on a hard surface and press the red cap with the palm of your hand until it locks. Remove the red cap.
Shake the can vigorously to mix the components.
Application
Environmental conditions: Temperature 15-25 °C, r.h. < 80%
Distance from the support: 20-30 cm.
Number of coats: 2-3
Interval between coats: 5 minutes
Recommended thickness: 40-50
Drying (at 20°C, r.h. <65%)
Dust-free 5 - 15 minutes
Touch dry 4 hours
Full curing 24 hours
Pot-Life 5-6 hours
Instructions for use
Shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds.
Cleaning with anti-silicone solvent.
Product preparation
Shake the can vigorously.
Remove the red cap from the nozzle, turn the can upside down and place the red cap on the stem at the base of the can.
Position the can upside down on a hard surface and press the red cap with the palm of your hand until it locks. Remove the red cap.
Shake the can vigorously to mix the components.
Application
Environmental conditions: Temperature 15-25 °C, r.h. < 80%
Distance from the support: 20-30 cm.
Number of coats: 2-3
Interval between coats: 5 minutes
Recommended thickness: 40-50
Drying (at 20°C, r.h. <65%)
Dust-free 5 - 15 minutes
Touch dry 4 hours
Full curing 24 hours
Pot-Life 5-6 hours
Instructions for use
Shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds.
Disposal:
Aerosol can: FE40 – Iron collection
Cap and nozzle: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Aerosol can: FE40 – Iron collection
Cap and nozzle: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
