Rolma Spray Can Filler Putty Antirust Sandable K 600

Rust-proof filling putty sandable GIRGIO

Repaintable after 1 hour

DRYING TIMES
Dust-free - 10 minutes
Dry to the touch - 20 minutes
Deeply dry - 24 hours

FEATURES
anti-rust filler putty, quick-drying, specifically designed for professional use. To be used as a primer for painting. Creates a thickness of 50 microns. Sandable dry or wet after 1 hour. Adheres to iron, steel, zinc, and plastic. A preliminary check is recommended on aluminum.

SUPPORT PREPARATION:
remove from the surface to be painted any trace of dirt, grease or peeling paint. Sand as needed.

INSTRUCTIONS FOR USE:
shake the can for about 1 minute. Apply several light and crossed hands while holding the can in a vertical position at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Preparation of the surface:
remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.

Instructions for use:
shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.