Blackboard Effect Paint that can be written on with chalk Ep!c Blackboard enamel tablò 1LT

EP!C TABLO' special paint for interiors with a blackboard effect

Tablò is a single-component, acrylic, matt water-based finish with excellent coverage. It is applied on plastered walls, plasterboard walls and prepared, seasoned, dry and well-cleaned wooden supports. After a few days the surface can be used as a blackboard that can be written on with white and colored chalk. It can be erased with a felt or soft cloth, the surface is washable. Available in the typical blackboard colour.

Characteristics:

• high washability
• easy application
• excellent coverage

It can be used on walls, doors, and furniture, to renovate and personalize living environments, creating a creative space where adults and children can express their imagination. Applicable to lime, cement and gypsum-based plastered walls. It can also be applied to plasterboard and wood, following appropriate preparation of the support.

Color: BLACK

Application:

Roller or brush

Dilution:

Roller: 5-10%

Brush: 5-10%

Application cycle:

NEW WALL SUPPORTS

They must be sufficiently seasoned and dry, free of impurities of any kind, including loose sand. For an excellent aesthetic effect the surface must be perfectly smooth, therefore, if necessary, smooth the walls with 23100050 Titanstucco. Application of a coat of 2340003 Titancril diluted up to a maximum of 1:3 with water, depending on the absorption of the wall. On a dry wall, apply at least two coats of EP!C TABLO' approximately 6-8 hours apart.

WALL SUPPORTS ALREADY PAINTED

Remove old paint that is peeling off by scraping and brushing. In the case of old tempera or lime-stained paints, they must be removed completely. Then proceed as for new wall supports.

PLASTERBOARD SUPPORTS

They must be very clean and dry. We recommend applying a coat of 2340003 Titancril diluted up to a maximum of 1: with water, depending on absorption.

WOODEN SUPPORTS

On dry, well-cleaned, seasoned wood, apply a coat of 32100050 Samopac. Sand and apply 2 coats of EP!C TABLO' approximately 6-8 hours apart.

Disposal:

Jar and cap: PP05 Plastic collectiona

Only if perfectly clean.

Check the provisions of your municipality.

Application cycle:
NEW WALL SUPPORTS
They must be sufficiently seasoned and well-dried, free from impurities of any kind, including poorly adhering sand. For an excellent aesthetic effect, the surface must be perfectly smooth; therefore, if necessary, skim the walls with 23100050 Titanstucco. Apply one coat of 2340003 Titancril diluted up to a maximum of 1:3 with water, depending on the absorption of the wall. On a dry wall, apply at least two coats of EP!C TABLO' at intervals of about 6-8 hours apart.
ALREADY PAINTED WALL SUPPORTS
Remove old peeling paints by scraping and brushing. In the case of old tempera paints or lime washes, they must be completely removed. Then proceed as for new wall supports.
GYPSUM BOARD SUPPORTS
They must be clean and dry. It is recommended to apply one coat of 2340003 Titancril diluted up to a maximum of 1: with water, depending on absorption.
WOODEN SUPPORTS
On dry, seasoned wood that is well cleaned, apply one coat of 32100050 Samopac. Sand and apply 2 coats of EP!C TABLO' at intervals of about 6-8 hours apart.

Disposal:

Jar and cap: PP05 – Plastic collection

Only if perfectly clean.
Check your municipality's regulations.