MAFRA MF67 Maniac Shampoo Ceramic Lava Seals and Protects 500ml

MAFRA MF67 Ceramic Shampoo from the Maniac Line™ is Mafra's product that washes, seals and protects.

Thanks to its 3-in-1 formula and the presence of super-hydrophobic SiO2 ceramic polymers it gives the treated surface a self-cleaning hydrophobic ability that helps keep the car cleaner for longer.

The product can be used as a maintenance product, enhancing and amplifying the properties of the wax, sealant and ceramic coating previously applied to the surface.

HOW TO USE:

- Hand wash with bucket:

• Pour 4 caps of Ceramic Shampoo into a bucket of water and use as a regular shampoo;
• Proceed by washing one panel at a time, always in the shade, with the vehicle wet and working from the bottom up, opposite to the use of a traditional shampoo;
• Apply with a microfiber cloth or mitt;
• Work one panel at a time, spreading the product over all components, including emblems and details;
• Complete the wash over the entire vehicle and proceed to rinsing and drying with the Super Dryer super absorbent microfiber cloth;

How to increase the hydrophobic and protective performance of Ceramic Shampoo?

- With microfiber mitt or pad:

• Dilute the product at a ratio of 1:5 (1 part product to 5 parts water).
• Spray the resulting solution onto the same wash pad or mitt
• Wash in stages, half the vehicle at a time, avoiding letting the product dry on the bodywork;
• Rinse;
• Proceed todrying with an ultra-absorbent cloth.

- With Foam Gun technique:

• Perform a pre-wash with Foam Gun Prewash;
• Perform the hand wash with Neutral Foam Shampoo;
• Dilute Ceramic Shampoo 1:3 (one part product to 3 parts water);
• Dispense the product using foaming technique, from the bottom up;
• Let act for 1 minute;
• Rinse with high-pressure water from top to bottom;
• Dry with the “Super Dryer” microfiber cloth;

RECOMMENDATIONS:

Ensure that the vehicle surface is cool and not directly exposed to sunlight.

We suggest using the two-bucket washing method (one with the shampoo/water solution and the other with clean water only) in combination with a microfiber pad or mitt such as our Double Face.” First perform a pre-wash with our “Foam Gun Prewash” to remove coarse dirt on the surface and decontaminate the vehicle with “Iron Remover”, to remove coarse dirt and prevent the formation of micro-scratches. Performing this step before applying “Ceramic Shampoo” will allow greater adhesion of the SiO2 ceramic polymers to the bodywork.

Product to be applied from bottom to top.