MA-FRA Maniac Line Wheel Decontaminant Iron Remover for Car Wheels 1 L MF172

MA-FRA Maniac Line Wheel Decontaminant is a professional iron decontaminant for car wheels, developed to remove iron particles, metallic residues and brake dust that accumulate on wheels during normal vehicle use.

Its special high-cling foaming formula allows the product to remain in contact with the surface, helping dissolve stubborn iron contamination that is difficult to remove with a standard wheel cleaner.

One of Wheel Decontaminant's distinctive features is its purple colour reaction: when the product comes into contact with iron particles, it reacts and turns purple, making its decontaminating action visible.

Thanks to its foamy consistency, the cleaner clings to surfaces and extends contact time with contaminants, improving the effectiveness of the treatment.

The formula is ready to use and requires no dilution, making application quick and easy.

Wheel Decontaminant is ideal for car detailing enthusiasts, routine wheel maintenance and professional wheel decontamination treatments.

It can also be used on compatible painted bodywork and glass surfaces, subject to the limitations specified by the manufacturer.

Why use an iron decontaminant?

While driving, car wheels are constantly exposed to metallic particles from the braking system.

These particles can settle and cling firmly to surfaces, making them difficult to remove with standard cleaners.

Iron contamination can appear as:

• Dark spots on wheel surfaces

• Stubborn brake dust residues

• Persistent metallic deposits

• Surfaces that remain contaminated even after washing

• Loss of original shine due to surface deposits

Wheel Decontaminant acts specifically on these contaminants, helping remove them through a targeted chemical reaction.

Foaming formula with purple reaction

The unique formula of Maniac Line Wheel Decontaminant combines two essential features.

High-cling foam

The foam clings to the wheel surface, allowing the cleaner to remain in contact with contaminants for the necessary time.

This allows the active ingredient to work even in hard-to-reach areas.

Purple colour reaction

On contact with iron particles, the product reacts and develops a distinctive purple colour.

The colour change makes it possible to visually identify contaminated areas and observe the product at work.

The purple colour indicates a reaction with iron contaminants and should not be confused with the colour of a standard foaming cleaner.

Main applications

Wheel Decontaminant is suitable for:

• Iron decontamination of car wheels

• Brake dust removal

• Iron particle removal

• Metallic residue removal

• Deep cleaning of compatible painted wheels

• Routine wheel maintenance

• Professional car detailing treatments

• Decontamination of compatible painted surfaces

• Removal of iron contamination from glass

• Preparation of surfaces for subsequent protective treatments

Warning: it is not suitable for unprotected aluminium wheels, anodised wheels or light-alloy wheels, as specified in the manufacturer's exclusions.

Key features

• Professional iron decontaminant

• Designed specifically for wheels

• Removes iron particles and metallic residues

• Acts on brake dust

• Purple colour reaction

• High-cling foaming formula

• Extended contact time

• Ideal for stubborn contamination

• Easy to work in with detailing brushes and wheel brushes

• Easily rinsed off with water

• Professional Maniac Line sprayer

• Controlled application

• Ready to use, no dilution required

• Ideal for routine maintenance

• Suitable for car detailing

• 1000 ml size

Preparation

Before application, ensure the surfaces are cool.

Ideally, use in the shade and in an open or well-ventilated area.

Do not apply to hot surfaces or surfaces exposed to direct sunlight.

Application

Spray Wheel Decontaminant evenly onto the surface to be treated.

Leave the product to work for approximately 3–4 minutes.

As it works, the product will react with iron contamination and turn purple.

For particularly stubborn contamination, gently agitate the surface with a soft-bristled brush.

Rinse thoroughly with water, completely removing the product and dissolved residue.

If necessary, repeat the treatment on heavily contaminated areas.

Important: never allow the product to dry on the surface.

Dilution

Ready-to-use product.

No dilution with water is required.

The formula is ready to be applied directly using the supplied sprayer.

When should Wheel Decontaminant be used?

It is particularly suitable when:

Wheels have an accumulation of brake dust

Small dark spots remain after washing

Stubborn metallic contamination is present

A deep clean of the wheels is needed

The surface is being prepared for a protective treatment

A complete car detailing process is being carried out

Unlike standard wheel cleaners, Wheel Decontaminant specifically targets iron contamination.

A dedicated cleaner may be needed to remove general road dirt, oily residues and non-ferrous contamination.

Final result

When used correctly, Wheel Decontaminant helps achieve:

Reduced iron contamination

Removal of metallic deposits

Cleaner wheels

Restoration of the surface's original shine

Better preparation for subsequent protective treatments

Surfaces free of product residue after thorough rinsing

Technical data and product information

Brand: MA-FRA

Range: Maniac Line

Product: Wheel Decontaminant

Type: foaming iron decontaminant

Function: removal of iron particles and brake dust

Size: 1000 ml – 1 litre

Dilution: not required

Use: ready to use

Formula: high-cling foam

Reaction: turns purple on contact with iron contamination

Application: professional sprayer

Dwell time: approximately 3–4 minutes

Rinse: plenty of water

Manufacturer code: MF172

Do not release the product, any residues or its packaging into the environment.

Any detergent residues and contaminated packaging must be handled in accordance with applicable regulations and the instructions provided in the Safety Data Sheet.

To dispose of the bottle correctly, check the environmental labelling on the packaging and follow the instructions issued by your local council or waste management provider.

Do not apply to hot surfaces.

Do not use in direct sunlight.

Do not allow the product to dry on the surface.

Do not use on unprotected or unpainted metals.

Do not use on unprotected aluminium wheels.

Do not use on anodised wheels.

Do not use on light alloy wheels.

Do not use on motorcycles.

Avoid applying to unpainted brake calipers.

Preferably use outdoors in a well-ventilated area.

Test for compatibility on special surfaces before use.

Wear appropriate personal protective equipment.

Keep out of reach of children.