COLSAM
Professional Transpiring Water-Based Wall Paint Masking and Covering Matt White Colsam COVER 14LT
Breathable paint for interiors, opaque, masks imperfections, easy to apply and with a good white point.
Quantity:
Pickup available at Punto Vendita Net Coatings
Usually ready in 1 hour
Professional Transpiring Water-Based Wall Paint Masking and Covering Matt White Colsam COVER 14LT
Punto Vendita Net Coatings
Pickup available, usually ready in 1 hour
Via Emilia 2
35043 Monselice PD
Italy
WHITE BASE COVER
professional breathable paint
Breathable paint for interiors, opaque, masks imperfections, easily
applicable and with a good white point. Formulated for professional use.
COMPOSITION:
Finishing coat paint, in aqueous dispersion, single-component with physical drying, matte, vinyl. Classified according to UNI 8681: B4.C.0.A.2.HA
MAIN FEATURES:
- eliminates imperfections
- easy application
- perfect matte white
Available in 5lt and 14lt formats.
Application method:
Brush, roller, airless.
Dilute with Water
Dilution: Roller 20-25%, brush 20-40%, airless 25-40%
Mixing: Carefully mix the product, slowly adding water until the desired application viscosity is achieved.
Theoretical yield: 8-10 m²/l per coat, depending on the absorption of the substrate
APPLICATION CYCLE:
NEW SUBSTRATES
Ensure that the surface is dry and clean, fill any cracks with Titanstucco. To improve wall protection or in case of a dusty surface, it is recommended to apply a fixer such as Titancril or White Fixative.
Proceed with the application of COVER BIANCO BASE as a finish.
ALREADY PAINTED SUBSTRATES
If the old paint is of good quality and well adhered to the substrate, remove the dust and proceed as for new substrates. If the old paint is flaking or powdering, remove the inconsistent parts, dust off, possibly fill with Titanstucco and, in the case of surfaces with mold, treat with products from the Biosistem line. Then proceed as for the new wall.
BEWARE OF FROST
Brush, roller, airless.
Dilute with Water
Dilution: Roller 20-25%, brush 20-40%, airless 25-40%
Mixing: Carefully mix the product, slowly adding water until the desired application viscosity is achieved.
Theoretical yield: 8-10 m²/l per coat, depending on the absorption of the substrate
APPLICATION CYCLE:
NEW SUBSTRATES
Ensure that the surface is dry and clean, fill any cracks with Titanstucco. To improve wall protection or in case of a dusty surface, it is recommended to apply a fixer such as Titancril or White Fixative.
Proceed with the application of COVER BIANCO BASE as a finish.
ALREADY PAINTED SUBSTRATES
If the old paint is of good quality and well adhered to the substrate, remove the dust and proceed as for new substrates. If the old paint is flaking or powdering, remove the inconsistent parts, dust off, possibly fill with Titanstucco and, in the case of surfaces with mold, treat with products from the Biosistem line. Then proceed as for the new wall.
BEWARE OF FROST
Disposal:
Jar + Lid: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Jar + Lid: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
