BORMA WACHS
Borma Wachs Impregnating Wood Water Based Internal external 2.5lt Resistant
Color
Borma Wachs Impregnating Wood Water Based Internal external 2.5lt Resistant
NEUTRAL - COLORLESS
Punto Vendita Net Coatings
Via Emilia 2
35043 Monselice PD
Italy
Decorative impregnating agent HOLZ LASUR WATER-BASED NATURAQUA
Water-based wood stain. It penetrates the fiber and offers initial protection.
For internal or external use.
Complete the treatment cycle with the desired finish (e.g. Naturaqua FLATTING)
Water-based non-film-forming impregnator based on resins and oils. It penetrates deeply into the wood, enhancing the structure by highlighting the grain, giving a bright and vibrant tone. The precious substances it contains, combined with UV filters, prevent the formation of chromophore molds and the attack of wood-eating insects. Suitable for both indoor and outdoor use, formulated with light-resistant colors. It offers valid basic protection against weather agents. Its natural density facilitates brush applications.
Usage:
Ready to use, it is recommended to apply with a brush (always the first coat), on clean and dry surfaces.
On external surfaces, apply at least two coats with a minimum interval of 4/6 hours, varying depending on the surface and the amount applied, total drying after 24 hours. If necessary, lightly sand the surface before the second coat.
For particularly refined finishes, it is recommended to rag the surface after brush application.
Pack of 2.5LT
Returns: 8-12sqm/Lt depending on the absorption of the wood.
First hand drying: 4/6 hours
Total drying: 24 hours
Cleaning: Turpentine
Application tools: Brush/Cotton Cloth
Shake well before use.
On pre-treated supports, perform a compatibility test.
Also available in sizes: 10lt – 20lt
Disposal:
TAP AND JAR – FE40 – STEEL COLLECTION
Always check the regulations of your municipality.
On outdoor surfaces, apply at least two coats with an interval of a minimum of 4/6 hours, varying depending on the surface and the amount applied, total drying after 24 hours. If necessary, lightly sand the surface before the second coat.
For particularly refined finishes, after brush application, it is recommended to rag the surface.
Cleaning: White spirit
Application tools:
Brush/Cotton cloth.
Shake well before use.
CAP – LDPE 04 – PLASTIC COLLECTION
CAP AND JAR – FE40 – STEEL COLLECTION
Always check your municipality's regulations.