Borma Wachs Flatting Extra Marine Boat Paint Gloss and Matt Water 750ml - 2.5lt

Borma Wachs NATURAQUA Flatting
Extra Marine – Special water-based paint for boating. Water-based finish
for outdoor wood coatings.
Available in glossy or matte, with a classic decorative effect. Suitable also
for interior coatings (paneling, ceilings,...).
It is usually applied after a first coat of colored impregnating agent Naturaqua Holz Lasur. A
rich with UV filters and antifungal additives, it penetrates deeply, providing a perfectly water-resistant
and weatherproof veil, protecting the wood for a long time, enhancing its aesthetics and natural shine.

Finish:
GLOSSY 90 gloss - Article code: NAT3926
MATT 30 gloss - Article code: NAT3926-30

Available in 750ml or 2.5lt packaging.

Instructions for use.

In the case of new supports, ensure that the wood is well-seasoned, clean, and dry, then proceed with the application of a first coat, followed by at least a second coat, preferably after 4/8 hours, to ensure proper drying.
In the case of restoring already treated surfaces, proceed with a light preliminary sanding to clean and even out the support. If necessary, pre-treat any detached paint with Flatting Marine extra diluted by 20/30% with water, then apply at least two coats of the product, waiting 4/8 hours between the two applications. Coverage: 12/18 sqm/liter, variable depending on the type of support. Cleaning with water. Drying 24 hours.

Use: indoor and outdoor. On pre-treated supports, perform a compatibility test.

Disposal:

CAP – LDPE 04 – PLASTIC COLLECTION
CAP AND JAR – FE40 – STEEL COLLECTION

Always check your municipality's regulations.