Spray Zinc Zinc Brilliant 800 ° High Temperatures MT 503

MT 503 - ZINC ALU

Brilliant - resistant 800 CC

Overpaintable with itself at any time

DRYING TIMES

Dust dry - 15 minutes

Dry to the touch - 30 minutes

Dry in depth - 24 hours

FEATURES

professional finishing paint based on zinc and aluminum powder. Protects metal substrates such as exhaust systems, aluminum components, galvanized surfaces, etc. from corrosion. Conductive and suitable for spot welding. Unaffected by many acids and alkaline solutions. Medium resistance to abrasion.

PREPARATION OF THE SUPPORT:

remove all traces of dirt, grease or peeling paint from the surface to be painted. Sand as needed.

INSTRUCTIONS FOR USE:

shake the can for about 1 minute. Apply several light and crossed coats keeping the can in vertical position at a distance of about 20 cm. Do not spray with low temperatures and in any case in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and / or nitro thinner.

Withstands heat up to 800CC

Preparation of the surface:

remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.

Instructions for use:

shake the can for about 1 minute. Apply several light and crossed coats, holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.