Spray can Rolma Stucco Filler Anticorrosive 60 micron CR 4 400ml

CR 4

anti-corrosive filling putty sandable

Repaintable after 30 minutes with itself and with most 1K and 2K bodywork products

AVAILABLE COLORS:

CR4 BEIGE

CR4B WHITE

CR4R RED

CR4BU BLUE

CR4GC LIGHT GRAY

CR4GS DARK GRAY

DRYING TIMES

Dust-free - 5 minutes

Dry to the touch - 10 minutes

Deeply dry - 30 minutes

FEATURES

professional one-component self-priming putty with high active protection against corrosion. Excellent adhesion and remarkable filling power (up to 60 microns). Especially suitable for small touch-ups on partially smoothed surfaces and on bare metal. Adheres to iron, steel, zinc and, after appropriate treatment, to aluminum. Sandable dry or wet after 30 minutes.

SUPPORT PREPARATION:

remove from the surface to be painted any trace of dirt, grease or peeling paint. Sand as needed.

INSTRUCTIONS FOR USE:

shake the can for about 1 minute. Apply several light and crossed hands while holding the can vertically at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Preparation of the surface:

remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.

Instructions for use:

shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.