Megasid Two-Component Stucco for Fiberglass Fiberglass 250 gr Grouting Fiberglass

The MEGASID FIBERGLASS two-component putty is a spatula putty formulated with a high percentage of fiberglass, making it suitable for reconstructing missing parts in car bodywork and for plastic parts, such as bumpers, fiberglass tanks, etc. The product is very easy to spread and sand, making it absolutely unmatched for restoration work.

MEGASID FIBERGLASS can be painted with any type of primer, single or two-component.

Available in 1.5kg version Click here

TECHNICAL DATA:

APPLICATION:

− Make sure that the surfaces to be putty are perfectly dry and clean; if applying on bare metal, sand it with abrasive papers P 80 and P 150;

− Take from the jar with clean tools the amount to use, adding 1 - 3 grams of hardener for every 100 grams of product;

- Mix that amount by thoroughly blending the two components;

− Apply the putty to the surface to be worked on, keeping in mind that the product can be sanded (grit P 80 – P 120 dry) after about 30 - 40 minutes; the curing times may be altered depending on the ambient temperature: they shorten with temperatures above 25 °C and lengthen with lower temperatures;

− Do not put back the catalyzed and/or unused putty into the jar to avoid the entire contents of the jar from deteriorating;

− Close the jar after use to prevent the product from hardening when in contact with air.

DATA: 

Application: Spatula

Catalysis: 1 – 3 %

Gel Time: 5-7 Minutes at 25°C

Outside Print: 10-30 Minutes at 25°C

Complete Drying: <1 Hour at 25°C

Foldable: After 30-40 minutes at 25°C

Disposal: 

Jar: FE40 - Iron Collection 

Cap: HDPE2 - Plastic collection.

Recycle only if perfectly clean and empty. 

Otherwise recycle at designated ecological centers.