Epoxy Primer 2K GRAY 7035 + Catalyst for Iron Aluminum Fiberglass 1.3KG +270GR

Light Grey Epoxy Primer RAL 7035
Two-component anti-rust primer, used for the protection of ferrous materials in painting cycles where good resistance to corrosion, adhesion, and resistance to chemical agents is required.
Base product formulated with epoxy-polyamide resins, containing zinc phosphates

Uses:
Suitable for the protection of new or maintenance-required ferrous materials, of great application versatility, it finds primary use in carpentry, mechanical and petrochemical industries, and in the maintenance of plants in aggressive environments.
THE IMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY.

KIT content:
1.3KG (1LT) of Product
270 GR (310ML) of Catalyst
TOTAL FINISHED PRODUCT: 1.57 KG
Main properties:
• rapid drying
• good anti-corrosive power
• excellent adhesion on metal

Yield: +- 2 m2/l
Recommended thickness: 110-180 microns
CATALYSIS:
BY WEIGHT: 20% -- Example: 100g of base – 20g of catalyst
IN VOLUME: 100:37
Duration once catalyzed (POT LIFE): 8 Hours

DILUTION:
With Epoxy Thinner – Click here to purchase.
If sprayed: 5-15%
If Airless: 0-5%
Brush-Roller: 5-15%
Application method:
Brush, Roller, Spray and Airless
Recommended nozzles (indicative data):
from 1.5 to a maximum of 2.5mm
Pressure 3-4 atm

Mixing:
This product is supplied in two separate containers.
1) Shake EPOPRIMER LIGHT GRAY (Part A) with a mechanical stirrer;
2) Add the Catalyst (Part B) and mix with a mechanical stirrer;
3) Dilute according to the instructions. Once mixed, the product must be applied within the specified pot life of the mixture.
Curing time at 20°C:
To the touch 1 hour
In depth: 24 hours
Minimum overcoating: 3 hours
Maximum overcoating: 4 months

Preparation of Supports:
STEEL
Sandblast with suitable abrasives to grade Sa 2½ (ISO 8501-1:2007) or SSPC-SP10 - NACE No 2.
A roughness profile (Rz) of 35-50 μm (ISO 8503-4:2012) is recommended.
For moderately aggressive environments or maintenance work, brush with a machine tool to grade St 3 (ISO 8501-1:2007).
HOT-DIP GALVANIZED STEEL
Sandblasting with suitable abrasives with a dense profile.
For moderately aggressive environments or maintenance work, brush with a machine tool to grade St 3 (ISO 8501-1:2007).
ELECTROLYTICALLY GALVANIZED STEEL
Sandblasting with suitable abrasives with a dense profile.
For moderately aggressive environments or maintenance work, brush with a machine tool to grade St 3 (ISO 8501-1:2007). A preliminary test is always recommended.
ALUMINUM
Sandblasting with suitable abrasives with a dense profile.
For moderately aggressive environments or maintenance work, brush with a machine tool to grade St3 (ISO 8501-1:2007). A preliminary test is always recommended.

Disposal:
Jar, Cap and Bottom Ends: FE40 - Iron Collection
Catalyst Jar: FE40 – Iron Collection
Catalyst Cap: HDPE02 – Plastic Collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.
Check the regulations of your municipality.