Rholm Zinc Zinc Zinc Spray Can 98% MT 598 400ML

MT 598 - DARK ZINC 98%

Restoration of galvanized surfaces

Repaintable with itself within 10 minutes or after 48 hours

DRYING TIMES

Dust-free - 10 minutes

Dry to the touch - 20 minutes

Deeply dry - 24 hours

FEATURES

anti-corrosive primer and quick-drying finish based on resins thermoplastics and zinc powder with a title higher than 98% (ISO 3549). Ideal for use on ferrous metal surfaces such as welded joints, pipes, tanks, towers and carpentry. Thanks to the high coverage and the presence of active pigmentation, creates an effective protective layer against oxidation phenomena.

SUPPORT PREPARATION:

remove from the surface to be painted any trace of dirt, grease or paint that peels off. Sand as needed.

INSTRUCTIONS FOR USE:

shake the canister for about 1 minute. Apply several light and crossed hands holding the cylinder in a vertical position at a distance of about 20 cm. Not spray with low temperatures and in the presence of humidity. After use invert the canister and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Resistant to heat up to 100°C

Preparation of the surface:

remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.

Instructions for use:

shake the can for about 1 minute. Apply several light and crossed coats, holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.