Spray Can Restoration Lights Brightening Transparent Headlights Polycarbonate VRF Paint Rolma 400ml

VRF

paint restoration of polycarbonate headlights

Overpaintable with itself wet on wet or after 1 hour

DRYING TIMES

Dust-free - 10/15 minutes

Dry to the touch - 1 hour

Deeply dry - 8 hours

FEATURES

specific acrylic paint for use on polycarbonate surfaces and in particular for restoration of frosted and/or yellowed headlights. Exceptional adhesion to the substrate, hardness superficial of the film and high brightness.

INSTRUCTIONS FOR USE:

degrease the surface to be treated. Sand with abrasive paper of grain increasing (600/800/1200). Remove sanding residues with a cloth damp. Apply a light coat of product as a primer from a distance of 20 cm; after a few minutes apply one or more finishing coats, avoiding the drippings. is recommended to wait 24 hours before using the vehicle on road. Do not use in cold temperatures and in the presence of humidity. After use, turn the canister upside down and spray for a few seconds. Removal paint with acetone and/or nitro thinner.

Instructions for use:

degrease the surface to be treated. Sand with increasing grit sandpaper (600/800/1200). Remove sanding residues with a damp cloth. Apply a light coat of product as a primer from a distance of 20 cm; after a few minutes, apply one or more finishing coats, avoiding drips. It is recommended to wait 24 hours before using the vehicle on the road. Do not use in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.