Spray paint can Nitro acrylic enamel Glossy RAL colors Weather and corrosion resistant

RAL spray paint, quick drying acrylic paint, resistant to bad weather and corrosion due to contact with petrol, alcohol and various degreasers/cleaners.

4 types of cans available.

They will be shipped based on stock availability.

Quality 1 paint  

Spray cans:

Rolma Acrylevo

Rolma Mega Color

Glick

Net Coatings

ROLMA ACRYLEVO:

ACRYLEVO, 100% acrylic, in its renewed graphic design, represents the 5th evolution over the years of a product that has always been the flagship of the company's production. The continuous research on raw materials, combined with the experience gained with the users of the product, have allowed us to make further improvements to the formulation, which was already at the top of the market in terms of quality level.
In the new version the product presents in particular “A STRONGLY REDUCED HARMFUL RATE..

The danger symbol disappears and the legal indications are reduced. The reduced environmental impact therefore favors its use even in environments subject to restrictive use regulations, such as industry and shipbuilding.a.

 

ROLMA MEGA COLOR:

high performance acrylic enamel

• wood
• metal
• iron
• plastic

 

Can be overpainted with itself at any time

 

CHARACTERISTICS
Quick-drying acrylic paint suitable for touching up and painting metal, wood and plastic products. Excellent adhesion and resistance to atmospheric agents.

DRYING TIMES
Dust free - 10 minutes
Dry to the touch - 20 minutes
Deeply dry - 24 hours

 

 

Sample spray can service - contact us -

 

CHARACTERISTICS
acrylic paint for professional and hobby use. Excellent adhesion to all types of support; high yield and coverage; absence of drips during the application phase; drying speed; surface resistance; inalterability of colors over time. ACRYL EVO has been explicitly designed to significantly reduce the impact on the user and is therefore recommended in all those cases where more restrictive standards are required. NOT APPLICABLE on polystyrene.

SUBSTRATE PREPARATION:
remove any trace of dirt, grease or loose paint from the surface to be painted. Sand as needed. On unpainted or rusty iron, apply 1 or more coats of anti-rust primer and overpaint after 30 minutes.

INSTRUCTIONS FOR USE:
shake the canister for about 1 minute. Apply several light, crossed coats, holding the can in a vertical position at a distance of approximately 20 cm. After use, turn the can upside down and spray for a few seconds. Paint removal with nitro thinner and/or acetone.

Can be overpainted with itself at any time

Drying times
out of dust - 10 minutes
dry to the touch - 20 minutes
deep dry - 24 hours

Surface preparation:
remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary. On unpainted or rusty iron, apply 1 or more coats of anti-rust primer and overpaint after 30 minutes.

Instructions for use:
shake the can for about 1 minute. Apply several light and crossed coats, holding the can vertically at a distance of about 20 cm. After use, turn the can upside down and spray for a few seconds. Paint removal with nitro thinner and/or acetone.

Can be overpainted with itself at any time

Drying times
dust-free - 10 minutes
touch dry - 20 minutes
through dry - 24 hours

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.