Restriction Note Reach 2023:
In August 2020, the European Union introduced a new REACH restriction on the use of products containing more than 0.1% of monomeric diisocyanates.
The present product has a higher amount of allowed diisocyanates.
To purchase this product starting from August 24, 2023, it will be necessary to provide the certification of course completion.
Correspondent without diisocyanates: Sikaflex 556
SIKAFLEX SOLO Polyurethane Adhesive Primerless for car windows
(EX SIKATACK GO4IT! AND GO)
Sikaflex® SOLO is a primerless and solvent-free windshield adhesive that provides a 3-hour Minimum Drive-Away Time (MDAT).
Provides long-lasting opening time and ensures safe application even in hot environments.
Installations carried out with Sikaflex® SOLO do not leave unpleasant odors in the car after replacing the windshield.
Note: Application without primer on glass requires glass preparation using an automotive-grade glass cleaner such as Sika® Cleaner G+P.
The bonding surfaces must be free of contaminants and have adequate protection from UV rays.
- Adhesion to glass without primer
- 3 hours Minimum Drive-Away Time
- Easy to extrude with a manual gun
Download the technical data sheet: Click here
VANTAGGI:
- Adhesion to glass without primer
- 3 hours Minimum Drive-Away Time
- Easy to extrude with a manual gun
- Good stability of the curb and thixotropy
- Quick adherence
- Without solvents, no smell
IMPIEGHI:
Sikaflex® SOLO is only to be used by experienced professional users.
This product and the related information on its use are designed for the replacement of vehicle glass.
For other applications, it is necessary to carry out tests with substrates and real conditions to ensure the adhesion and compatibility of materials.
AVAILABLE FORMATS:
CARTRIDGE 300ML
Pouch 400ML
SURFACE PREPARATION:
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants.
The bonding surfaces must be prepared with an automotive-grade glass cleaner such as Sika® Cleaner G+P.
Sikaflex® SOLO is able to bond to glass and screen prints without further pre-treatment.
Additional information on the application and use of the detergent is available in the technical data sheet of the corresponding product.
is compatible with Sika's Black-Primerless or All Black installation process.
Windshields without ceramic coatings require adequate protection from UV rays
APPLICATION:
is recommended to apply the adhesive with a piston-type gun. Sikaflex® SOLO can be applied with good quality manual guns.
Remember that viscosity will increase at low temperatures. For easy application, bring the adhesive to room temperature before use.
Open time is significantly shorter in hot and humid climates. The glass must always be installed within the open time.
Never install glass after the adhesive has formed a skin
RIMOZIONE:
Sikaflex® SOLO unpolymerized can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent.
Once hardened, the material can only be removed mechanically.
Hands and exposed skin should be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.
Do not use solvents on the skin.
Smaltimento:
Cartridge: FE40 - Iron collection
Recycle only if perfectly clean and empty.
Otherwise recycle at specific ecological centers.
Check the regulations of your municipality.
LABEL DANGER:
Danger signs
H334 May cause allergic or asthmatic symptoms Breathing difficulties if inhaled.
Caution advice
:
Prevenzione:
Avoid breathing mist or vapors.
When the ventilation of the room is insufficient, wear a respiratory protection device.
Reazione:
In case of inhalation: transport the injured person to fresh air and keep them at rest in a position that promotes breathing.
P342 + P311 In case of respiratory symptoms: contact a POISON CENTER/ a doctor.
Deletion:
Remove the content/container in accordance with local regulations.
Dangerous components to be reported on the label:
4,4'-Methylenediphenyl diisocyanate
m-tolylidene diisocyanate
Additional labeling
From August 24, 2023, industrial or professional use is allowed only after receiving adequate training.
