MAFRA MF67 Ceramic Shampoo from the Maniac Line™ is the product from Mafra that cleans, seals, and protects.

Thanks to its 3 in 1 formula and in the presence of super hydrophobic ceramic polymers Si02 gives the treated surface a self-cleaning hydrophobic capability that allows the car to stay cleaner for longer.

The product can be used as a maintenance product, increasing and enhancing the properties of the wax, the sealant, and the ceramic coating previously applied to the surface.

MODE FOR USE:

- Hand washing with bucket:

• Pour 4 caps of Ceramic Shampoo into a bucket of water and use it like a normal shampoo;
• Proceed by washing one panel at a time, always in the shade, on a wet vehicle and starting from the bottom to the top, in contrast to the use of traditional shampoo;
• Spread with a microfiber cloth or glove;
• Work on one panel at a time, distributing the product across all components, including emblems, and details;
• Complete the wash on the entire vehicle and proceed to rinsing and drying with the super absorbent microfiber cloth Super Dryer;

How to enhance the hydrophobic and protective performance of Ceramic Shampoo?

- With microfiber glove or pad:

• Dilute the product in the ratio 1:5 (1 part of product and 5 of water).
• Nebulize the obtained solution on the same pad or washing glove
• Wash in steps, half a vehicle at a time, avoiding letting the product dry on the bodywork;
• Rinse;
• Proceed to thedrying with an ultra-absorbent cloth.

- With technique Foam Gun:

• Perform a pre-wash with Foam Gun Prewash;
• Perform hand washing with Neutral Foam Shampoo;
• Dilute Ceramic Shampoo 1:3 (one part of product and 3 parts of water);
• Deliver the product with foaming technique, from bottom to top;
• Let it act for 1 minute;
• Rinse with high-pressure water from top to bottom;
• Drying with the microfiber cloth "Super Dryer";

RECOMMENDATIONS:

Make sure that the the surface of the vehicle is cold and should not be exposed directly to sunlight.

We suggest using the two-bucket washing method (one with the shampoo/water solution and the other with only clean water) in combination with a pad or a microfiber glove like our Double Face.” First of all perform a pre-wash with our "Foam Gun Prewash" to remove the coarse dirt present on the surface and decontaminate the vehicle with “Iron Remover”, to remove coarse dirt and prevent the formation of micro-scratches. Performing this step before applying “Ceramic Shampoo” will allow for greater adhesion of the SiO2 ceramic polymers to the bodywork.

Product to be applied from bottom to top.

HAZARD LABEL:

Attention. P102 Keep out of reach of children. H319 Causes serious eye irritation. H412 Harmful to aquatic life with effects of
long lasting. P273 Do not disperse in the environment. P280 Wear protective gloves/protective eyewear. P305+P351+P338 IN CASE OF CONTACT WITH EYES:
rinse thoroughly for several minutes. Remove any contact lenses if it is easy to do so. Continue rinsing. P337+P313 If irritation of the
if irritation persists, consult a doctor. P501 Dispose of the product/container in accordance with local/regional/national/international regulations.