Restriction Note Reach 2023:
PURCHASE THE CORRESPONDING PRODUCT WITHOUT DIISOCYANATES: CLICK HERE
Descrizione:
Glass bonding kit.
KIT WITH 10 ML PRIMER includes:
2 SikaFlex SOLO 300ml
Primer 507 of 10ml
1 Sika cleaner spray G+P 500ml
KIT WITH 100ML PRIMER AND SPONGE includes:
2 SikaFlex SOLO 300ml
Primer 507 of 100ml
2 PCA sponges
1 Sika cleaner spray G+P 500ml
DESCRIZIONE:
Sikaflex® SOLO is a primerless and solvent-free glass windshield adhesive that provides a 3-hour Minimum Drive-Away Time (MDAT).
Provides long-lasting opening time and ensures safe application even in hot environments.
Installations carried out with Sikaflex® SOLO do not leave unpleasant odors in the car after replacing the windshield.
Note: Application without primer on glass requires glass preparation using an automotive-grade glass cleaner such as Sika® Cleaner G+P.
The bonding surfaces must be free of contaminants and have adequate protection from UV rays.
Vantaggi:
- Usable without black primer
- Easy extrusion
- Simple and clean application
- Good thixotropy
- Filo corto
- "All in one" Sika module
- Short SDAT (with dual airbags, without safety belts according to US FMVSS 212 / 208 standards)
- Solvent-free
Application:
SikaTack® Go4it! has been specially formulated for the auto windshield replacement sector. Due to its excellent properties, it is suitable for applications both in the workshop and with mobile service in hot and humid climate conditions.
SIKA PRIMER 207:
Sika® Primer-207 is a black solvent-based primer that reacts with moisture and forms a thin layer. This layer acts as a bond between substrates and adhesives. Sika® Primer-207 is specifically formulated for treating the bonding surface before applying Sika's one-component polyurethanes. This primer may provide excellent adhesion without a prior activation phase on many substrates. Sika® Primer-207 fluoresces under UV light for a limited period of time. This feature is used during the inspection process.
ADVANTAGES
- Improved adhesion on a wide variety of substrates
- Fluorescent if exposed to UV light
- Easy to use
Application:
Sika® Primer-207 is used to improve adhesion on a wide range of different substrates such as float glass, ceramic glass, plastic, pre-coatings, painted surfaces, electronic coatings, and metals. Seek advice from the manufacturer and perform tests on original substrates before using Sika® Primer-207 on materials subject to stress cracking.
Primer Disposal 10ml - 100ml:
Can: FE40 - Iron Collection
Cap: HDPE2 - Plastic collection.
Recycle only if perfectly clean and empty.
Otherwise recycle at specific ecological centers.
Disposal Go4IT!
Can: FE40 - Iron Collection
Recycle only if perfectly clean and empty.
Otherwise recycle at specific ecological centers.
Disposal Sika Cleaner G+P Spray:
Bottle: PET1 - Plastic collection.
Trigger: Other7 - Mixed waste collection.
Recycle only if perfectly clean and empty.
Otherwise recycle at specific ecological centers.
Dangerousness Label SikaPrimer 207:
H225 Liquid and vapors easily flammable.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H334 May cause allergic symptoms or asthma or breathing difficulties if inhaled.
H336 May cause drowsiness or dizziness
Repeated exposure can cause dryness or cracking of the skin
EUH204Contains isocyanates. May cause an allergic reaction.
Keep away from heat sources, hot surfaces, sparks, open flames, or other sources of ignition. Do not smoke.
Avoid breathing mist or vapors.
P280 Wear gloves/ protective clothing/ protect eyes/ protect face.
In case of inhalation: transport the injured person to fresh air and keep them at rest in a position that promotes breathing. In case of discomfort, contact a POISON CONTROL CENTER/ a doctor.
P342 + P311 In case of respiratory symptoms: contact a POISON CENTER/ a doctor.
In case of fire: use dry sand, dry chemical or alcohol-resistant foam to extinguish.
ethyl acetate
aromatic polyisocyanate
4,4'-Methylenediphenyl diisocyanate
m-tolylidene diisocyanate
Dangerousness Label Sika cleaner g+p spray:
Classification (REGULATION (EC) No 1272/2008)
Substance or mixture not classified as hazardous according to Regulation (EC) No 1272/2008.
The REACH restriction is briefly explained below.
In August 2020, the European Union introduced a new REACH restriction on the use of products containing more than 0.1% monomeric diisocyanates.
These new rules will also apply to products such as polyurethane adhesives, sealants, coatings or injections used in industrial production.
The objective of this restriction is to reduce the health risks associated with diisocyanates by ensuring that workers handling these substances are adequately informed and trained.
Many users of polyurethanes in Europe will need to attend specific worker health and safety courses to continue using these materials.
The training courses are created with the aim of improving the health and safety of workers at work.
Employers are responsible for training employees by August 24, 2023.
Starting from 08/24/2023, the following products will no longer be purchasable through this e-commerce, it will be necessary to contact us at: info@netcoatings.com and provide us with the course pass certificate.
Alternatively it will be possible to purchase the various correspondents without the presence of diisocyanates.
CLICK ON THE CODES TO PURCHASE.
PRODUCTS FALLING WITHIN THE RESTRICTION:
SIKAFLEX 252 -- Correspondent: SIKAFLEX 552 AT
SIKAFLEX 221 -- Correspondent: SIKAFLEX 515 or improvement SIKAFLEX 521 UV
SIKAFLEX 212 FC -- Correspondent: SIKAFLEX 515 or improvement SIKAFLEX 521 UV
SIKATACK GO4IT! -- Correspondent: SIKAFLEX 556
SIKAFLEX 265 -- Corresponding: SIKAFLEX 554
SIKAFLEX 268 -- Corresponding: SIKAFLEX 554
SIKAFLEX 255 FC -- Correspondent: SIKAFLEX 556
SIKAFLEX 290 DC PRO -- Correspondent: NO CORRESPONDENT
SIKAFLEX 291I -- Correspondent: SIKAFLEX 591
SIKAFLEX 295 UV -- Corresponding: SIKAFLEX 591
EXPANDED FOAM IN CAN -- NO MATCH
For further information contact us by email or telephone.