Decorative impregnator HOLZ LASUR Borma Wachs

Images for illustrative purposes, the color may vary slightly.

Classic protective and decorative impregnator, for indoor and outdoor use, odorless, with a medium dry residue and easy application. It gives color to the wood, enhancing its structure. Contains UV filters and additives that provide effective protection against harmful agents for wood. Light-resistant colors. Good resistance to weather conditions. Applicable by brush, spray, or immersion. Holz Lasur is characterized by excellent penetration ability.

Non-film forming impregnator based on resins and oils. It penetrates deeply into the wood, enhances the structure by highlighting the grain, giving a bright and vibrant tone.

The precious substances it contains, combined with UV filters, prevent the formation of chromatic mold and the attack of wood-eating insects. For internal and external use, formulated with light-resistant colors, it offers valid basic protection against atmospheric agents.

Its natural density facilitates brush applications

Finish with Glossy or Matte Varnish

Usage:

Ready to use.

On clean and dry surfaces, it is recommended to apply with a brush (always the first coat).

On external supports, apply at least two coats spaced by a minimum of 8 hours, total drying after 24h.

If necessary, lightly sand the surface before the second coat.

For particularly refined finishes, it is recommended to rag the surface after brush application.

750ml package

Returns: 8-12sqm/Lt depending on the absorption of the wood.

First hand drying: 6/8 hours

Total drying: 24 hours

Cleaning: Turpentine

Application tools: Brush/Cotton Cloth

Shake well before use.

On pre-treated supports, perform a compatibility test.

Also available in sizes: 375ml - 2.5lt – 5lt – 10lt – 20lt

Wood shavings, cotton cloths, paper, and similar products soaked in liquid product, and left in such conditions, can cause self-combustion phenomena. Therefore, be careful, in the case of such cleaning materials or others, to ensure good ventilation to allow for the rapid drying of the product or to wet them with water before disposal.

Disposal:

CAP – LDPE 04 – PLASTIC COLLECTION

TAP AND JAR – FE40 – STEEL COLLECTION

Always check the regulations of your municipality.

Hazard label:

H226 Flammable liquid and vapors. H336 May cause drowsiness or dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. P210 Keep away from heat sources, hot surfaces, sparks, open flames, or other ignition sources. No smoking. P280 Wear protective gloves/clothing to protect eyes/face. P370+P378 In case of fire: extinguish with carbon dioxide, chemical powder, foam. Do not use water. P501 Dispose of the product in accordance with wastewater regulations. Do not disperse in the environment. P102 Keep out of reach of children.

keep out of reach of children, P261 Avoid breathing dust, fumes and gases, mist, vapors, aerosols. P312 In case of discomfort, contact a POISON CENTER / a doctor /.. P101 If medical advice is needed, have product container or label at hand. PA03-4 P2.33 Keep the container tightly closed and in a well-ventilated place.

Contains: Hydrocarbons, C9-C11. n-alkanes, isoparaffins. Cyclic <296 aromatics

UFI: 2EF2-DOX1-9008-DMGA