Single-component polyurethane foam for insulation and assembly. For manual or gun application
DESCRIPTION
Polipur 888 is a single-component polyurethane foam for insulation and assembly developed to create seals between construction elements. High yield, crosslinks thanks to environmental humidity.
FIELDS OF APPLICATION
Developed for fixing window frames to building elements, partitions, ceiling and floor joints; for sealing pipe and vent penetrations in walls and floors. Excellent adhesion to concrete, brick, stone, plaster, wood, metal and many plastics such as EPS and XPS.
SPECIAL FEATURES
• High quality professional polyurethane foam
• For fixing and thermal and acoustic insulation
• Reaction to fire: class B3
• Good thermal performance
• 750ml format available for manual or automatic gun application
• Paintable
APPLICATION
Shake well before use. Well cleaned and degreased surfaces can be moistened before application to improve adhesion and expansion; for optimal yield, it is advisable to operate around 20C. Screw the supplied dispensing cannula; apply the foam by keeping the canister in an upside down position and acting on the valve. Pay attention to the dosage of the foam as you obtain a volume almost double that of the one applied. For subsequent applications, return to an upright position and dispense for a few short moments; then, clean the valve with Sigill CIOGLIUMA. The MATIC must be used with the appropriate gun: screw the cylinder into the threaded housing; adjust the extrusion using the adjustment screw..
CLEANING OF EQUIPMENT AND PERSONAL PROTECTION
Attention, do not touch the foam with your hands: non-hardened foam can be cleaned with FOAM SHAKER. If hardened, it can only be removed mechanically!
Disposal:
Can: FE40 Iron collectiono
Cap and spout: PP05 Plastic collectiona
Recycle only if perfectly clean and empty.
Otherwise recycle at appropriate ecological centres.
Check the provisions of your municipality.
Hazard label:
UFI: YGKW-7V4S-PQ8T-WG79
H222 Extremely flammable aerosol. H229 Pressurized container: may burst if heated. H351 Suspected of causing cancer. H362 May be harmful to breast-fed infants. H332 Harmful if inhaled. H373 May cause damage to organs through prolonged or repeated exposure. H319 Causes serious eye irritation. H315 Causes skin irritation. H335 May cause respiratory irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects. EUH204 Contains isocyanates. May cause an allergic reaction
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Not smoking. P251 Do not pierce or burn, even after use. P410+P412 Protect from sunlight. Do not expose to temperatures above 50C / 122F. P501 Dispose of contents/container in accordance with current waste treatment legislation. P102 Keep out of reach of children. P211 Do not spray onto an open flame or other ignition source. P101 If medical advice is needed, have product container or label at hand. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/clothing and eye/face protection. P304+P340 IF INHALED: remove the victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse thoroughly for several minutes. Remove any contact lenses if it is easy to do so. Continue rinsing. Contains: DIPHENYLMETHANE DIISOCYANATE, ISOMERS AND HOMOLOGUES CHLORINATED PARAFFINS, C14-17.7.
The use of this product may cause allergic reactions in individuals already sensitized to diisocyanates.
Individuals with asthma, eczema, or skin conditions should avoid contact, including dermal contact, with this product.
This product should not be used in poorly ventilated conditions unless a protective mask with a suitable gas filter (e.g. type A1 compliant with EN 14387) is used.
As of August 24, 2023, industrial or professional use is only permitted after receiving appropriate training.
