Reach 2023 restriction note:
In August 2020, the European Union introduced a new REACH restriction on the use of products containing more than 0.1% monomeric diisocyanates.
This product has a higher quantity of permitted diisocyanates.
To purchase this product starting from August 24, 2023 it will be necessary to provide certification of course completion.
Corresponding without diisocyanates: Sikaflex 556
SIKAFLEX SOLO Primerless Polyurethane Adhesive for car glass
(EX SIKATACK GO4IT! AND GO)
Sikaflex SOLO is a primer-free, solvent-free glass windshield adhesive that offers 3 hours of Minimum Drive-Away Time (MDAT)..
Provides a long open time and ensures safe application even in hot environments.
Installations performed with Sikaflex SOLO do not leave unpleasant odors in the car after replacing the windshield..
Note: Primerless application to glass requires preparing the glass using an automotive grade glass cleaner such as Sika Cleaner G+P..
Bonding surfaces must be free of contamination and have adequate protection from UV rays.
- Adhesion to glass without primer
- 3 hours Minimum Drive-Away Time
- Easy to extrude with a manual gun
Download the technical sheet: Click here
ADVANTAGES:
- Adhesion to glass without primer
- 3 hours Minimum Drive-Away Time
- Easy to extrude with a manual gun
- Good bead stability and thixotropy
- Quick adhesion
- Solvent-free, no smell
EMPLOYMENTS:
Sikaflex SOLO is for use only by experienced professional users..
This product and its usage information are designed for the replacement of automotive glass.
For other applications, testing with real-world substrates and conditions is required to ensure material adhesion and compatibility.
AVAILABLE FORMATS:
300ML CARTRIDGE
400ML BAG
SURFACE PREPARATION:
Surfaces must be clean, dry and free of grease, oil, dust and contaminants.
Bonding surfaces should be prepared with an automotive grade glass cleaner such as Sika Cleaner G+P..
Sikaflex SOLO is capable of bonding to glass and screen prints without further pre-treatment..
Further information on the application and use of the cleaner can be found in the corresponding product data sheet.
It is compatible with Sika's Black-Primerless or All Black installation process.
Windshields without ceramic coatings require adequate UV protection
APPLICATION:
It is recommended to apply the adhesive with a piston type gun. Sikaflex SOLO can be applied with good quality hand guns..
Please remember that viscosity will increase at low temperatures. For easy application, bring the adhesive to room temperature before using.
Open time is significantly shorter in hot, humid climates. Glass must always be installed within the open time.
Never install glass after the adhesive has formed a skin
REMOVAL:
Uncured Sikaflex SOLO can be removed from tools and equipment with Sika Remover-208 or another suitable solvent.o.
Once hardened, the material can only be removed mechanically.
Hands and exposed skin should be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water..
Do not use solvents on your skin.
Disposal:
Cartridge: FE40 Iron collectiono
Recycle only if perfectly clean and empty.
Otherwise recycle at appropriate ecological centres.
Check the provisions of your municipality.
DANGER LABEL:
Hazard statements
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary advice
:
Prevention:
P261 Avoid breathing mist or vapours.
P284 When room ventilation is insufficient, wear respiratory protection equipment.
Reaction:
P304 + P340 IF INHALED: remove the victim to fresh air and keep at rest in a position comfortable for breathing.
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.
Elimination:
P501 Discard contents/container in accordance with local regulations.
Hazardous components to be reported on the label:
4,4'-methylenediphenyl diisocyanate
m-tolylidene diisocyanate
Additional labelling
«As of August 24, 2023, industrial or professional use is only permitted after receiving appropriate training..