Ultra-fast curing Purform-based plastic repair adhesive®

SikaForce-302 (Purform) is based on Purform technology, an industry-leading polyurethane with less than 0.1% monomeric diisocyanate for improved occupational health and safety protection. SikaForce-302 (Purform) is specifically designed for repairing plastic parts in a car workshop. It provides good adhesion to various types of plastic and can be overpainted with almost all types of paint. ce.  

• Less than 0.1% monomeric diisocyanate for better protection of health and safety at work
• Good adhesion on a wide variety of substrates
• Very rapid hardening at room temperature

Advantages:

• Less than 0.1% monomeric diisocyanate for better protection of health and safety at work
• Good adhesion on a wide variety of substrates
• Very rapid hardening at room temperature
• Suitable for sanding after just 10 minutes
• Overpaintable
• No slipping or dripping
• No volumetric shrinkage

Uses:

SikaForce-302 (Purform) is used in auto repair shops for plastic repair work such as damage to bumpers, bonding plastic parts and brackets, rebuilding plastic clips or filling unused sensor openings and small holes. This product is only suitable for experienced professional users. Testing with real-world substrates and conditions is required to ensure material adhesion and compatibility.  

Surface preparation

Thoroughly clean and degrease all bonding surfaces with Sika Cleaner G+P and a clean cloth. Then abrade the surfaces with 80-180 grit sandpaper.0.

Clean all bonding surfaces again with Sika Cleaner G+P and a clean cloth. Make sure the surface is completely dry and no moisture remains before the next step of the process..

Spray a thin layer of SikaForce-300 Primer on both sides and allow to evaporate for at least 5 minutes. Additional surface treatment depends on the specific nature of the substrates..

Application

SikaForce-302 (Purform) must be processed at temperatures between 15 C and 30 C (product, ambient and substrate temperatures).to).

Extrude the adhesive without a mixer to equalize the levels. Connect the static mixer, dispense one third of the length of the mixer and discard it before starting to apply adhesive to the bonding surfaces.

Extrude SikaForce-302 (Purform) with appropriate piston guns. To achieve proper mixing, the Mixer Tips for SikaForce-302 are required (part of the package and sold separately).e).

After extrusion, leave the mixer on the cartridge until the next use of the adhesive. The remainder of the adhesive will last several weeks if stored properly.

To start using SikaForce-302 (Purform) again, remove the static mixer and dispose of it properly. Clean the cartridge outlet carefully. Then connect a new mixer and start dispensing as described above.o.

Sika Contouring Film and Reinforcement Mesh are available for contouring and modeling tasks.

Removal

Uncured SikaForce-302 (Purform) can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once hardened, the material can only be removed mechanically.te.

Hands and exposed skin should be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water..

Do not use solvents on your skin

DANGER LABEL:

H319 Causes serious eye irritation

Prevention: P264 Wash skin thoroughly after use. P280 Wear eye protection/face protection. Reaction: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if it is easy to do so. Continue rinsing. P337 + P313 If eye irritation persists, get medical advice/attention.

COMP. B:

H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H335 May cause respiratory irritation

P261 Avoid breathing mist or vapours. P280 Wear gloves/eye protection/face protection. Reaction: P304 + P340 + P312 IF INHALED: remove the victim to fresh air and keep him at rest in a position comfortable for breathing. If you feel unwell, call a POISON CENTER/doctor. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P337 + P313 If eye irritation persists, get medical advice/attention. P362 + P364 Take off all contaminated clothing and wash it before reuse.