The two-component filler MEGASID STUCCO PER PLASTICA is a formulation based on high quality unsaturated polyester resins; it is an extremely flexible and adhesive product, characterized by excellent characteristics of spreadability and sandability.

It is mainly used in the repair of bumpers and the repair of plastic parts in general.

TECHNICAL DATA:

 

Specific weight	1650 20g/mll	(MI 001)
V.O.C.	45 2 g/ll	(ASTM 2369)
Viscosity	800 50 Passs	(MI 002B; 25C))
Consistency	650 50 Passs	(MI 002B; 25C))
Color	Dark gray

 

APPLICATION:

− Make sure that the surfaces to be grouted are perfectly dry and clean, sand the same with P 80 and P 150 abrasive papers;

− Take the quantity to use from the jar with clean tools, adding 1 - 3 grams of hardener for every 100 grams of product;

− Mix this quantity by amalgamating the two components well;

− Apply the filler on the surface to be worked on, bearing in mind that the product can be sanded (dry P 80 P 120 grit) after about 25-30 minutes; the hardening times can be altered according to the ambient temperature: they shorten with temperatures above 25 C and lengthen with lower temperatures;i;

− Do not put catalysed and/or unused grout back into the can to prevent the entire contents of the can from deteriorating;

− Close the jar after use, in order to prevent the product from hardening in contact with air.

DATA:

Application: Spatula

Catalysis: 1 3 %%

Gel Time: 2-4 Minutes at 25CC

Out of Footprint: 10-12 Minutes at 25CC

Complete Drying: <1 Hour at 25CC

Sandable: After 25-30 minutes at 25CC

Disposal:

Jar and Cap: FE40 - Iron Collection

Recycle only if perfectly clean and empty.

Otherwise recycle on special ecological centers.

Hazard label:

UFI STUCCO CODE: HC90-30P4-A00G-S6Y9

UFI CATALYST CODE: V800-F0JP-U00J-NPDK

H226Flammable liquid and vapour.H361dSuspected of damaging the unborn child.

H372Causes damage to organs through prolonged or repeated exposure.

H319Causes serious eye irritation.

H315Causes skin irritation.

H317May cause an allergic skin reaction

P201 Obtain special instructions before use.

P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Not smoking.

P260Do not breathe dust / fume / gas / mist / vapors / spray.

P280Wear protective gloves and eye/face protection.

P308+P313IF exposed or concerned, get medical advice/attention.

P370+P378 In case of fire: Use carbon dioxide, foam, chemical powder to extinguish.

Contains:

STYRENE

MALEIC ANHYDRIDE

BIS(2-ETHYLHEXANOATO) DI COBALT Reaction mass of 2,2'-[(4-methylphenyl)imino]bisethanol and 2-[[2-(2-hydroxyethoxy)ethyl](4-methylphenyl)amino]-ethanol2,2' -[(4-methylphenyl)imino]bisethanol

 

VOC (Directive 2004/42/CE)

VOC expressed in g/litre of ready-to-use product: 45.00

Maximum limit: 250.00