2K CR6 filler putty

Overpaintable with water and solvent based primers and 1K and 2K finishing paints. If the product is not repainted within 24 hours, the surface must be sanded before repainting

DRYING TIMES

Dust dry - 5 minutes

Pot-life - 8 Hours

FEATURES

2K filler with excellent filling power (up to 180 microns), high corrosion protection and excellent sandability. It allows excellent adhesion on iron, steel and galvanized surfaces. Quick drying even at high thicknesses. Sandable after 3-5 hours at room temperature, after 30 minutes at 60 ° C

PREPARATION OF THE SUPPORT:

sand as needed. Use CR 40 degreasing detergent.

INSTRUCTIONS FOR USE:

the catalyst integrated in the cylinder must be activated at the time of use , according to the following procedure.

1) Shake the bottle vigorously.

2) Remove the red cap from the cap, and place it on the stem at the base of the cylinder.

3) Place the cylinder upside down on a rigid surface and press the red cap firmly with the palm of the hand until it locks; remove the red cap.

4) Shake the bottle vigorously to mix the components. The cylinder is now ready for use. Do not spray with low temperatures and in any case in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

AFTER ACTIVATING THE CATALYST THE BOTTLE MUST BE FINISHED WITHIN 6 HOURS