Traffic divider paint Enamel for road markings White and Yellow EXTRA
Traffic divider paint Enamel for road markings White and Yellow EXTRA
- In stock, ready to ship
- Inventory on the way
- Shipping in 24/48 hours
- Secure payments
Traffic divider enamel for road markings.
Non-reflective, quick-drying paint for road markings, with covering pigments and specific effect fillers.
Paint for finishing coat, in solution, single-component, with oxidative chemical hardening, matt, chloralkyd.
Classified according to UNI 8681: B4. AOB2.BD
AVAILABLE COLOURS:
White
EXTRA yellow
EMPLOYMENTS:
Product for non-reflective horizontal road markings, applicable on road surfaces and floors made of bituminous asphalt.
Characterized by rapid drying, excellent resistance to the outdoors and to vehicle transit
Dilution:
On new asphalt 2-3% maximum
Other cases: 5% maximum
Theoretical yield: 1.4 1.6 m2 per KG per hando
Recommended thickness: 180-200 microns
APPLICATION CYCLE:
Apply to dry surfaces, free of oil, grease and tire residue.
Clean and proceed with the application of the diluted product as recommended.
Do not apply if rain is imminent.
Open to traffic: 20 - 30 minutes depending on the temperature and with relative air humidity below 70%.
Disposal:
JAR AND CAP: FE40 Iron collectiono
Recycle only if perfectly clean and empty.
Otherwise recycle at appropriate ecological centres.
Check the provisions of your municipality.
WHITE color danger label:
Code: 85100050K0043
UFI: JR23-90AK-V008-7DFX
Warnings: Caution
Hazard Statements:
H226 Flammable liquid and vapour.
H361d Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
EUH208 Contains: COBALT BIS(2-ETHYHEXANOATE).
May cause an allergic reaction.
Precautionary advice:
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Not
to smoke.
P280 Wear protective gloves/clothing and eye/face protection.
P370+P378 In case of fire: use CO2, foam, dry chemical to extinguish. Use water spray under the
control by specialized personnel.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P201 Obtain specific instructions before use.
P308+P313 IF exposed or concerned, get medical advice/attention.
Contains: TOLUENE
N-BUTYL ACETATE
YELLOW danger label:
Code: 85100028K0043
UFI: C0G3-P01C-P001-T6T5
Warnings: Caution
Hazard Statements:
H226 Flammable liquid and vapour.
H361d Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
EUH208 Contains: COBALT BIS(2-ETHYHEXANOATE).
May cause an allergic reaction.
Precautionary advice:
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Not
to smoke.
P280 Wear protective gloves/clothing and eye/face protection.
P370+P378 In case of fire: use CO2, foam, dry chemical to extinguish. Use water spray under the
control by specialized personnel.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P201 Obtain specific instructions before use.
P308+P313 IF exposed or concerned, get medical advice/attention.
Contains: TOLUENE