Rolma Spray Paint Can 2K Transparent Matt CR16 CR 16 400ml
Rolma Spray Paint Can 2K Transparent Matt CR16 CR 16 400ml
Regular price
€21,20
Sale price
€18,02
Save 15%
PAGA IN 3 COMODE RATE
Invoice
Billing information
Before proceeding with the purchase, it is necessary to fill in the billing information
Invoice type
Invoice
Billing information
Invoice type
- In stock, ready to ship
- Free and fast return
- Secure payments
- Free shipping over 55 €
ROLMA CAR REFINISHING CR16 TRANSPARENT 2K FOR CARS AND MOTORCYCLES, PROFESSIONAL FINISH
To be used as a finish on opaque bases.
Features:
- High protection from U.V.rays, stable to light and non-yellowing;
- Weather resistant;
- Excellent flow and finishing degree;
- Very high resistance to chemical agents and mechanical stress;
- Scratch and fuel resistant.
The catalyst (isocyanate) is contained in a casing which is in turn contained in the cylinder itself and must be activated at the time of use.
Preparation of the supports
Cleaning with antisilicone solvent.
Preparation of the product
Shake the bottle vigorously.
Remove the red cap from the cap, turn the bottle upside down and place the red cap on the stem at the base of the bottle.
Place the cylinder upside down on a hard surface and press the red cap with the palm of your hand until it locks. Remove the red cap.
Shake the can vigorously to mix the components.
Application
Environmental conditions: Temperature 15-25 C, u.r. & lt; 80%%
Distance from the support: 20-30 cm.
Number of passes: 2-3
Interval between hands: 5 minutes
Recommended thickness: 40-50
Drying (at 20C, u.r. & lt; 65%))
Dust dry 5 - 15 minutes
Touch dry 4 hours
Complete hardening 24 hours
Pot-Life 5-6 hours
Instructions for Use
Shake in the can for about 1 minute. Apply several light and crossed coats keeping the can in vertical position at a distance of 20 cm. Do not spray with low temperatures and in any case in the presence of humidity. After use, turn the can upside down and spray for a few seconds.
