Sika Flex SOLO Kit windshield glass replacement 5 PCS EX GO4IT!

Glass bonding kit.

KIT WITH PRIMER 10 ML includes:

2 SikaFlex SOLO 300ml

Primer 507 10ml

1 Sika cleaner spray G+P 500ml

 

KIT WITH PRIMER 100ML AND SPONGE includes:

 

2 SikaFlex SOLO 300ml

Primer 507 100ml 

2 PCA sponge 

1 Sika cleaner spray G+P 500ml

 

DESCRIPTION: 

Sikaflex® SOLO is a glass windshield adhesive that requires no primer and contains no solvents, offering 3 hours of Minimum Drive-Away Time (MDAT).

Provides a long open time and ensures a safe application even in hot environments.

The installations carried out with Sikaflex® SOLO do not leave unpleasant odors in the car after replacing the windshield.

Note: the application without primer on glass requires the preparation of the glass using an automotive-grade glass cleaner such as Sika® Cleaner G+P.

The bonding surfaces must be free of contaminants and have adequate protection from UV rays. 

Advantages:

- Usable without black primer

- Easy extrusion

- Simple and clean application

- Good thixotropy

- Short wire

- Sika "all in one" module

- Short SDAT (with dual airbag, without seat belts according to US FMVSS 212 / 208 standards)

- Solvent-free 

SIKA PRIMER 207:

Sika® Primer-207 is a black solvent-based primer that reacts with moisture and forms a thin layer. This layer acts as a bond between substrates and adhesives. Sika® Primer-207 is specifically formulated for treating the bonding surface before the application of Sika one-component polyurethanes. This primer may provide excellent adhesion without a prior activation phase on many substrates. Sika® Primer-207 fluoresces under UV light for a limited period of time. This feature is used during the inspection process.

 

ADVANTAGES

• Improved adhesion on a wide variety of substrates
• Fluorescent when exposed to UV light
• Easy to use

Sika Solo has been specifically formulated for the automotive windshield replacement sector. Given its excellent properties, it is suitable for applications both in the workshop and with mobile service in areas with hot-humid climatic conditions. Sika® Primer-207 is used to improve adhesion on a very wide range of different substrates such as float glass, ceramic glass, plastic, pre-coatings, painted surfaces, electronic coatings, and metals. Consult the manufacturer and conduct tests on original substrates before using Sika® Primer-207 on materials subject to stress cracking.

Disposal SIKFALEX SOLO:
Cartridge: FE40 – Iron collection

Disposal SIKAPRIMER 507:
Jar: FE40 – Iron collection
Cap and Seal: HDPE04 – Plastic collection

Disposal SIKACLEANER G+P:
Bottle: PET1 - Plastic collection
Trigger: O07 - Mixed waste collection

Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Check the regulations of your municipality.