RAL 7035 Light Gray Epoxy Primer

Two-component anti-rust primer, used for the protection of ferrous materials in painting cycles where good resistance to corrosion, adherence, resistance to chemical agents is required.

Primer product formulated with epoxy-polyamide resins, containing zinc phosphates

Uses:

Suitable for the protection of new or to be maintained ferrous materials, of great application versatility, it is mainly used in carpentry, mechanical and petrochemical industries and in the maintenance sector of systems in aggressive environments.

PICTURES ARE FOR ILLUSTRATION PURPOSES ONLY.

KIT content:

1.3KG (1LT) of Product

270 GR (310ML) of Catalyst

TOTAL FINISHED PRODUCT: 1.57 KG

Main properties:

• fast drying

• good anticorrosive power

• excellent adhesion to metal

 

Surrender: +- 2 m2/l

Recommended thickness: 110-180 microns

CATALYSIS:

BY WEIGHT: 20% -- Example: 100Gr of primer 20g of catalyste

BY VOLUME: 100:37

Duration once cured (POT LIFE): 8 hours

DILUTION:

With Epoxy thinner Click here to buy..

If sprayed: 5-15%

If Airless: 0-5%

Brush-Roller: 5-15%

Application method:

Brush, Roller, Spray and Airless

Recommended nozzles (indicative data):

from 1.5 to maximum 2.5mm

Pressure 3-4 atm

Mixing:

This product is supplied in two separate containers.

1) Shake LIGHT GRAY EPOPRIMER (Part A) with a mechanical stirrer;

2) Add the Catalyst (Part B) and mix with a mechanical stirrer;

3) Dilute according to directions. After mixing, the product must be applied within the specified Pot Life time.

Curing time at 20C:

To the touch 1 hour

In depth: 24 hours

Minimum overcoating: 3 hours

Maximum overcoating: 4 months

 

Support preparation:

STEEL

Sandblastwith suitable abrasives to grade Sa 2½ (ISO 8501-1:2007) or SSPC-SP10 - NACE No 2.

A roughness profile (Rz) of 35-50 μm is recommended (ISO 8503-4:2012).

For medium aggressive environments or maintenance work, brush with machine tool to grade St 3 (ISO 8501-1:2007).

HOT GALVANIZED STEEL

Brushing sandblastingwith suitable abrasives with a dense profile.

For medium aggressive environments or maintenance work, brush with machine tool to grade St 3 (ISO 8501-1:2007).

ELECTROLYTIC GALVANIZED STEEL

Brushing sandblastingwith suitable abrasives with a dense profile.

For medium aggressive environments or maintenance work, brush with machine tool to grade St 3 (ISO 8501-1:2007). A preliminary test is always recommended.

ALUMINUM

Brushing sandblastingwith suitable abrasives with a dense profile.

For medium aggressive environments or maintenance work, brush with machine tool to grade St3 (ISO 8501-1:2007). A preliminary test is always recommended.

 

Disposal:

Jar, Cap and Fermini Base: FE40 - Iron Collection

Catalyst Jar: FE40 Iron Collection

Catalyst Cap: HDPE02 Plastic Collectiona

Recycle only if perfectly clean and empty.

Otherwise recycle on special ecological centers.

Check the regulations of your municipality.

Bottom Hazard Label:

UFI: C5N3-10F6-100Q-HPS1

 

Indications of danger:

H226 Flammable liquid and vapour.

H373 May cause damage to organs through prolonged or repeated exposure.

H318 Causes serious eye damage.

H315 Causes skin irritation.

H335 May cause respiratory irritation.

H317 May cause an allergic skin reaction.

H412 Harmful to aquatic life with long lasting effects.

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Not smoking.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any

contact lenses if it is easy to do so. Continue rinsing.

P280 Wear protective gloves / clothing and eye / face protection.

P310 Immediately call a POISON CENTER or doctor/physician.

P370+P378 In case of fire: Use CO2, foam, chemical powders to extinguish. Use water spray under the

control by specialized personnel.

P261 Avoid breathing dust / fume / gas / mist / vapors / spray.

 

Contains:

XYLENE

ISOBUTYL ALCOHOL

EPOXY RESINS (700

C9 HYDROCARBONS, AROMATIC (BENZENE 0.1%))

FATTY ACIDS, TALL OIL, COMPOUNDS WITH OLEILAMINE

 

Product not intended for the uses envisaged by Directive 2004/42/EC.

 

 

Catalyst Hazard Label:

UFI: 4HW1-Q022-M00E-2AJQ

 

Indications of danger:

H226 Flammable liquid and vapour.

H304 May be fatal if swallowed and enters airways.

H373 May cause damage to organs through prolonged or repeated exposure.

H318 Causes serious eye damage.

H315 Causes skin irritation.

H335 May cause respiratory irritation.

H317 May cause an allergic skin reaction.

H336 May cause drowsiness or dizziness.

H412 Harmful to aquatic life with long lasting effects.

 

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Not smoking.

P331 Do NOT induce vomiting.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any

contact lenses if it is easy to do so. Continue rinsing.

P280 Wear protective gloves / clothing and eye / face protection.

P310 Immediately call a POISON CENTER or doctor/physician.

P370+P378 In case of fire: Use CO2, foam, chemical powders to extinguish. Use water spray under the

control by specialized personnel.

 

Contains:

XYLENE

ISOBUTYL ALCOHOL

BUTYL ALCOHOL

STARCHES, FROM C18-UNSATURATED. DIMERS OF FATTY ACIDS, FATTY ACIDS TALL OIL AND TRIETHYLTETRAMINE,

POLYMER REACTION PRODUCTS WITH BISPHENOL A-EPICHLORHYDRIN POLYMERS

 

Based on available data, the product does not contain PBT or vPvB substances in percentage at 0.1%..

The product does not contain substances having endocrine disrupting properties in a concentration of 0.1%..