Decorative impregnating agent HOLZ LASUR Borma Wachs

Images for illustrative purposes, the tint may change slightly.

Classic protective and decorative impregnating agent, for interiors and exteriors, odorless, with medium dry residue and easy to apply. It gives color to the wood, enhancing its structure. Contains UV filters and additives that provide effective protection against harmful wood agents. Lightfast colors. Good resistance to atmospheric agents. Applicable by brush, spray, immersion. Holz Lasur is characterized by an excellent penetration capacity.

Non-film-forming impregnating agent based on resins and oils. It penetrates deeply into the wood, enhances the structure by highlighting the grain, giving it a bright and lively tone.

The precious substances that compose it, combined with UV filters, prevent the formation of chromium molds and the attack of lignivorous insects. For indoor and outdoor use, formulated with lightfast colors, it offers a valid basic protection against atmospheric agents.

Its natural density facilitates brush applications

Finished with Glossy or Matt Flatting

Usage:

Ready to use.

On clean and dry substrates it is recommended to apply it by brush (always the first coat).

On external substrates apply at least two hands with a minimum of 8 hours, total drying after 24 hours.

If necessary, lightly sand the substrate before the second coat.

For particularly accurate finishes after brush application, we recommend tearing the support.

Pack of 750ml

Surrender: 8-12mq / Lt depending on the absorption of the wood.

First hand drying: 6/8 hours

Total drying: 24 hours

Cleaning: White spirit

Application tools: Brush / Cotton cloth

Shake well before use.

Perform a compatibility test on pre-treated substrates.

Also available in formats:375ml - 2.5lt 5lt 10lt 20lt0lt

Wood sawdust, cotton cloths, paper and similar products soaked in liquid product, and left in such conditions, can cause self-combustion phenomena. Therefore, be careful, in the case of such materials for cleaning or otherwise, to favor good ventilation to allow rapid drying of the product or to wet them with water before disposal.

Disposal:

LDPE CAP 04 PLASTIC COLLECTIONCA

CAP AND JAR FE40 STEEL COLLECTIONIO

Always check the provisions of your municipality.

Hazard label:

H226 Flammable liquid and vapor. H336 May cause drowsiness or dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. P210 Keep away from heat sources, hot surfaces, sparks, open flames or other sources of ignition. Not smoking. P280 Wear protective clothing / protective clothing to protect eyes / face. P370 + P378 In case of fire: extinguish with carbon dioxide, dry chemical. foam. Do not use water. P501 Dispose of product in accordance with waste water regulation. Do not disperse in the environment. P102 Keep yours

out of reach of children, P261 Avoid breathing dust, fumes and gases, mist, vapors, aerosols. P312 If you feel unwell. contact a POISON CENTER / doctor / .. P101 If you need to consult a doctor, have the content or label of the product available. PA03-4 P2.33 Keep container tightly closed and well-ventilated place.

Contains: Hydrocarbons, C9-C11. n-alkanes, iscalcanes. Ciclich & lt; 296 aromatics

UFI: 2EF2-DOX1-9008-DMGA