ROLMA
Rolma Spray Aerosol Epoxy Primer Monocomponent Gray 400ml K 700
Epoxy anticorrosive primer, suitable for galvanized sheets, aluminum, fiberglass, and raw iron
Quantity:
Pickup available at Punto Vendita Net Coatings
Usually ready in 1 hour
Rolma Spray Aerosol Epoxy Primer Monocomponent Gray 400ml K 700
Punto Vendita Net Coatings
Pickup available, usually ready in 1 hour
Via Emilia 2
35043 Monselice PD
Italy
Single-component anticorrosive epoxy primer GRAY RAL 7046
Repaintable after 2/3 hours with single-component paints. After 12 hours with 2K paints
FEATURES
Anticorrosive epoxy primer for ferrous materials. Suitable for application in thermosetting paint systems. It is used in the nautical sector, bodywork, and industry. A preliminary adhesion test is recommended for applications on aluminum, galvanized sheet metal, and light alloys.
Resists heat up to 80°C
DRYING TIMES
Dust-free 7 minutes
Touch dry 2 hours
Through dry 12 hours
Coloration:
Black 9005
Gray 7046
SURFACE PREPARATION
Remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.
INSTRUCTIONS FOR USE:
Shake the can for about 1 minute. Apply several light, crossed coats while holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.
Dust-free 7 minutes
Touch dry 2 hours
Through dry 12 hours
Coloration:
Black 9005
Gray 7046
SURFACE PREPARATION
Remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.
INSTRUCTIONS FOR USE:
Shake the can for about 1 minute. Apply several light, crossed coats while holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.
Disposal:
Aerosol can: FE40 – Iron collection
Cap and nozzle: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Check your municipality's regulations.
Aerosol can: FE40 – Iron collection
Cap and nozzle: PP05 – Plastic collection
Recycle only if perfectly clean and empty.
Otherwise, recycle at appropriate ecological centers.
Check your municipality's regulations.
