Macota Antirust Spray Paint Gripping Bottom Spray Can

HIGH RESISTANCE PROTECTIVE SPRAY BASE AGAINST RUST

Protects from atmospheric agents.

It is over-paintable.

Use :

Carefully clean the surface to be treated with antisilicone.

Apply at a distance of about 20-25 cm, apply 1- 2 coats, more if necessary..

If necessary, sand with P 600 P 800 paper..

Sand and / or paint after 2 hours.

For best results, spray in thin layers, every few minutes.

Shake the can well before use.

 

Hazard label:

H222 Extremely flammable aerosol.

H229 Pressurized container: May burst if heated

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

EUH066 Repeated exposure may cause skin dryness or cracking.

EUH211 Warning! In case of vaporization, dangerous respirable droplets may be formed. Do not breathe vapors or mists.

P210 Keep away from heat, hot surfaces, sparks, open flames or other sources of ignition. Not smoking.

P251 Do not pierce or burn, even after use.

P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 o C / 122 o F.

P211 Do not spray on an open flame or other ignition source.

P271 Use only outdoors or in a well-ventilated area.

P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.

P337 + P313 If eye irritation persists, consult a doctor.

Contains: ACETONE, ETHYL ACETATE, N-BUTYL ACETATE.

 

UFI: M410-H0GW-F00T-87Y4

Instructions for use:

-Clean the surface to be treated thoroughly with anti-silicone.
-Apply at a distance of about 20 – 25 cm, apply 1-2 coats, more if necessary.
-If needed, sand with P 600 – P 800 paper.
-Sand and/or paint after 2 hours.
-For a better result, spray in thin layers, with intervals of a few minutes.
-Shake the can well before use.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.