Gelatinous Semigloss Anti-Drip Anti-Rust Enamel Direct on Iron and Rust 1LT Colors of your choice
Gelatinous Semigloss Anti-Drip Anti-Rust Enamel Direct on Iron and Rust 1LT Colors of your choice
PAGA IN 3 COMODE RATE
- 100% Italian and quality products
- Possibility of Customization
- Secure payments
- Product not subject to return as it is produced at the time of order, as article 59 of the consumer code.
Anti-rust and anti-drip enamel 2 in 1 semi-gloss finish.
PACK OF 1LT - 1270GR
By purchasing more than 1 LT the product will be supplied in a single package.
Semi-gloss gelatinous thixotropic anti-rust enamel.
Two-in-one formula, applies directly without the need for preventive anti-rust treatments.
It is suitable for both industrial maintenance and DIY uses on metal structures in general.
Excellent and long-lasting paint, perfect even on vertical surfaces because it does not drip and is drip-proof.
Can be overpainted with synthetic enamels.
Finishing paint, in solution, single-component, with oxidative chemical drying, semi-gloss, alkyd.
Classified according to UNI8681: B4.A.0.B.1.AB
- anti-corrosion
- high filling power
- it doesn't drip
HOW TO BUY:
to purchase, if you don't know the RAL code, just view the second image of the product or click here, once you have identified the desired RAL code, enter it in the PERSONALIZED RAL section. The finish of this product is semi-gloss.
EMPLOYMENTS:
As an anti-rust enamel of great value in the carpentry and "do it yourself" sector. Ideal for the treatment of large structures such as warehouses, iron bridges, cisterns (external part), pilings, etc. and medium and small structures such as those found in construction, such as gates and railings, iron doors, railings, locks, etc.
It is also excellent for painting wood and its derivatives.
It can be applied directly to rust, as long as it adheres well to the support.
Dilution:
By brush maximum 5%
Maximum spray 5%
Theoretical yield: 10-11 m2 per LT by hand for a thickness of 45-55 microns
Drying:
Dust dry: 1 hour
To the touch: 10-12 hours
In depth: 24-48 hours
Overpaintable: 24 hours
Recommended nozzle diameter for spray application: 1.8mm
APPLICATION CYCLE:
On bare sheet metal, clean, degreased and without rust flakes.
TIXANAMIDE WHITE can be overpainted with:
- itself to obtain a semi-gloss finish highly resistant to rust and bad weather;
- synthetic enamels such as Settebello or Solista.
TIXANAMIDE WHITE can be applied directly to rust, as long as it adheres well to the support.
Disposal:
JAR AND CAP: FE40 Iron collectiono
Recycle only if perfectly clean and empty.
Otherwise recycle at appropriate ecological centres.
Check the provisions of your municipality.
Hazard label:
Code: 1370001
UFI: VTQ4-F00T-300Q-TH6A
Warnings: Caution
Hazard Statements:
H226 Flammable liquid and vapour.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking.
EUH208 Contains: COBALT BIS(2-ETHYHEXANOATE).
May cause an allergic reaction.
Precautionary advice:
P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Not
to smoke.
P280 Wear protective gloves/clothing and eye/face protection.
P370+P378 In case of fire: use CO2, foam, dry chemical to extinguish. Use water spray under the
control by specialized personnel.
P273 Do not release into the environment.
P391 Collect spillage.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
Contains: HYDROCARBONS, C9-C11, N-ALKANES, ISOALKANES, CYCLIC, <2% AROMATIC
1-METHOXY-2-PROPANOL
VOC (Directive 2004/42/EC):
High performance single-component paints.
VOC expressed in g/liter of ready-to-use product: 417.40
Maximum limit: 500.00
