Rolma Spray Can Epoxy Primer One Component Black 400ml K 700N k700

Single-component anti-corrosive epoxy primer

Repaintable after 2/3 hours with single-component paints. After 12 hours with 2K paints.

FEATURES

epoxy primer anticorrosive for ferrous materials. Suitable for application in thermosetting paint systems. It is used in the nautical sector, bodywork, and industry. A preliminary adhesion check is recommended for applications on aluminum, galvanized sheet metal, and light alloys.

Resistant to heat up to 80°C

DRYING TIMES

Dust-free 7 minutes

Dry to the touch 2 hours

Deeply dry 12 hours

Coloring:

Black 9005

Gray 7046

PREPARATION OF THE SUPPORT

remove from the surface to be painted any trace of dirt, grease or peeling paint. Sand as needed.

INSTRUCTIONS FOR USE:

shake the can for about 1 minute. Apply several light and crossed hands while holding the can in a vertical position at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Disposal:

Spray can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise recycle at designated ecological centers.

Check the regulations of your municipality.

Hazard label:

UFI: 0KW0-G0CT-E00R-XQHH

H222 - Highly flammable aerosol. H229 - Pressurized container: may explode if heated. H315 - Causes skin irritation. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. H412 - Harmful to aquatic life with long lasting effects.

P101 - In case of consultation with a doctor, keep the container or label of the product available. P102 - Keep out of reach of children. P210 - Keep away from heat sources, heated surfaces, sparks, flames, and other sources of ignition. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing aerosol. P271 - Use only outdoors or in a well-ventilated area. P273 - Do not disperse in the environment. P280 - Wear gloves, wear protective clothing. Protect eyes, face. P305+P351+P338 - IN CASE OF CONTACT WITH EYES: rinse thoroughly for several minutes. Remove contact lenses if easy to do. Continue rinsing. P312 - In case of discomfort, contact a POISON CENTER, a doctor. P332+P313 - In case of skin irritation: consult a doctor. P337+P313 - If eye irritation persists, consult a doctor. P405 - Store locked up. P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C, 122 °F. P501 - Dispose of product and container in accordance with national regulations.

EUH208 - Contains 2-butanone oxime; ethyl methyl ketoxime; ethyl methyl ketone oxime. May cause an allergic reaction. EUH211 - Warning! In case of vaporization, dangerous respirable droplets may form. Do not breathe vapors or mists.

Preparation of the surface:
remove any traces of dirt, grease, or peeling paint from the surface to be painted. Sand as necessary.

Instructions for use:
shake the can for about 1 minute. Apply several light and crossed coats while holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Remove paint with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.