Spray Primer Pigmented Primer for Plastic CR 5 Rolma CR5

CR 5 primer pigmented adhesive for plastic

Overpaintable after 10 minutes

TIMES OF DRYING

Dust-free - 5 minutes

Dry to the touch - 10 minutes

Deeply dry - 30 minutes

FEATURES

adhesion promoter for the subsequent painting of plastic parts. Suitable for application on rearview mirrors, spoilers, bumpers, and others hard plastic accessories. The slight aluminum pigmentation allows for highlight the treated surface. Effective on ABS, EMT, EP-laminates, PBTP, PC, POM, PP/EPDM, PPO, PUR and PVC.

SUPPORT PREPARATION:

clean with silicone remover or plastic cleaner. Sand down according to need.

INSTRUCTIONS FOR USE:

shake the canister for about 1 minute. Apply with a single thin layer holding the cylinder in a vertical position at a distance of about 20 cm. Not spray with low temperatures and in the presence of humidity. After use invert the canister and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Preparation of the support:

clean with silicone-free solvent or plastic cleaner. Sand as needed.

Instructions for use:

shake the can for about 1 minute. Apply with a single thin layer holding the can vertically at a distance of about 20 cm. Do not spray in cold temperatures and in the presence of humidity. After use, turn the can upside down and spray for a few seconds. Paint removal with acetone and/or nitro thinner.

Disposal:

Aerosol can: FE40 – Iron collection

Cap and nozzle: PP05 – Plastic collection

Recycle only if perfectly clean and empty.

Otherwise, recycle at appropriate ecological centers.