SikaFlex Cleaner 208 Sika Remover 208 1LT

Sika Remover-208 is used for preliminary cleaning of heavily contaminated non-porous substrates. Sika Remover-208 can be used to clean painted surfaces before bonding.o.

Sika Remover-208 can also be used to remove excess, uncured Sikaflex adhesive or sealant from application tools or dirty surfaces. This product is only suitable for experienced professional users.i.

Testing with real-world substrates and conditions must be performed to ensure material adhesion and compatibility.

Removes heavy contamination

Suitable for most painted surfaces and plastics

 DATA SHEET

Disposal:

Jar: FE40 Iron collectiono

Cap and Seal: HDPE02 Plastic collectiona

Recycle only if perfectly clean and empty.

Otherwise recycle at appropriate ecological centres.

Check the provisions of your municipality.

 

Hazard label:

H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic organisms with long lasting effects.

EUH066 Repeated exposure may cause skin dryness or cracking.

P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Not smoking. P261 Avoid breathing mist or vapours. P273 Do not release into the environment. Response: P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P331 DO NOT induce vomiting. P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. CE: 927-241-2

 

 

Removal of uncured material:
Remove most of the Sikaflex® residue with a knife or spatula. Dampen a cloth or rag with Sika® Remover-208 and remove any remaining adhesive or sealant.

Surface cleaning:
Clean painted surfaces with a cloth or rag dampened with Sika® Remover-208. Dampen a paper towel with the solvent by pouring the liquid onto the cloth. Never immerse the paper towel in Sika® Remover-208 as it may contaminate it! Clean the surface with the damp paper towel. Regularly use new paper towels to maintain cleaning power.

Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, non-linting paper towel.

Repeat the last two steps until no contaminants appear on the white paper towel.

Do not use on sensitive surfaces such as fresh paint.

Seal the container tightly immediately after each use.

Disposal:
Jar: FE40 - Iron Collection
Cap: HDPE2 - Plastic Collection.
Recycle only if perfectly clean and empty.
Otherwise, recycle at designated eco centers.